Asked on Jan 10, 2016
Wooden chair leg replacement
by Patti
+9
I would like to know where to buy wooden legs to replace broken and damaged ones for the chair in the attached photo. Any ideas?
8 answers
-
Try Homedepot.com or lowes first.If they do not have it possibly a Lumber yard.
![Janet Pizaro]()
Janet Pizaro
on Jan 10, 2016
-
Check the good will you might find a chair you could use for parts.
![Kathy Bitzan]()
Kathy Bitzan
on Jan 10, 2016
-
Your welcome
![Janet Pizaro]()
Janet Pizaro
on Jan 10, 2016
-
go to a habitat for humanity store and buy an old chair with sturdy legs and replace them to your chair ...glue and clamps are needed..try gorilla glue it is the best
![Ramona Lundrigan Sturge]()
Ramona Lundrigan Sturge
on Jan 11, 2016
-
It looks to me that only the front of the chair has decorative dowels?? Just buy another "plain" dowel the same size, cut to length you need....you will have to get the "broken" pieces out of the holes and PROBABLY sand the ends so they fit, glue in exsisting clean holes and your done....or if it is decorative there is a website craftparts.com that has decorative dowels, and many more websites online....you will have to search. And they are cheap....like under a dollar a piece...Good Luck!!
![Pauliegirl1]()
Pauliegirl1
on Jan 11, 2016
-
Have u tried removing a leg n taking it to the local lumber company, they might know someone with a lathe who could turn a perfect match. Or try looking at stair spindles. Simebofvthem maybe sturdy enough to use as chair legs. Jumping out of the box n let ur imagination take over.
![Robbie Sanders]()
Robbie Sanders
on Jan 12, 2016
-
If all else fails, Home Depot store and online carries a variety of table/chair legs
![Helen]()
Helen
on Jan 12, 2016
-
U might try heating the leg where it's glued, using a hair dryer, this may help in getting it out.
![Robbie Sanders]()
Robbie Sanders
on Jan 12, 2016
Janet Pizaro
on Jan 10, 2016
Kathy Bitzan
on Jan 10, 2016
Ramona Lundrigan Sturge
on Jan 11, 2016
Sign Up to Answer
