How can I repair a slow drain that leads into a septic tank?

by Barb
  4 answers
  • Beth Beth on Aug 26, 2019

    If the solutions above don't work, try getting a plumber's snake. It's safe for a septic system and useful for a lot of draining/plumbing problems!

  • Joy30150932 Joy30150932 on Aug 26, 2019

    You may need to clean out your traps so add some baking soda, about 1 cup to the drain, add enough vinegar to get to the trap and then let it fizz and work for an hour or so. It might be good to do this before going to bed so the mix can work longer. After, rinse with hot water. If you add a bit of baking soda when doing your dishes you will not have a problem with drains since it helps to cut the grease and keep your lines clean. .

  • Lynn Sorrell Lynn Sorrell on Aug 26, 2019

    have you emptied septic tank recently? Is it full? One of the safest things to do is boil a huge pot of water at least 8 qt. and dump into each of the drains repeat. Are the areas where the lines/pipes run free of any plants/trees that can cause drain pipe problems,like breaking of the pipes? These household chemicals kill much needed bacteria in septic systems "People have also believed that putting lime or baking soda in their tanks is helpful. This is true in certain situations because most enzymes and bacteria grow best in a non-acidic environment. By adding lime or baking soda, in the proper amounts, the pH level is brought to a neutral condition. On the other hand, too much lime and baking soda can also be harmful. Acids should never be added to a septic tank." more info. Do you use any type of enzyme maintenance? No septic tank additive will work better than a septic tank's natural function and useof healthy bacteria. No product will allow a homeowner to escape regular septic tankpumping and inspections. In fact, some additives can harm the system and causeseptic system failure, which will then require replacement.