Broken Tile Bathroom Floor

Carolina's Art
by Carolina's Art
6 Materials
3 Days

So what floor to install for our country cabin? for the master bedroom bathroom, we decided to use broken tile with all the left over tiles we've had through the years in different projects.

The first thing we needed to do was measure and cut a piece or pieces of hardie backer and screw it to the plywood floor.

The hardie backer boards will protect the plywood from water and it will give the floor a firm surface to install the tile.

Once that was done, I mixed the thinset with the drill.

My husband used a smaller tool to cut the necessary holes like where the toilet goes and the AC vent, etc.

Here is the hardie already installed ready for thinset.

You mix according to the package instructions but basically it should be like a semi thick consistency.

As you can see, lots of mixed tiles piled up from different projects.

I had plenty of other accent tiles to pick from because my friend gave me some boxes of smaller sample tiles. I decided to use the brown tones and the blue tones. I planned my design according to what I had.

I started with a step down area design using these four small tiles and then adding the broken pieces around it. I basically used a hammer to break them (use protective goggles and gloves).

I measured and marked where I wanted these sets of blue tiles and then installed those first and then the broken ones around it.

Well, at this point I ran out of thinset and my back was killing me, so I decided to stop and continue the next day.

So I finished the floor and had to wait to come back another day to do the grout. I decided I wanted a bluish tone gray for the grout but Home Depot only had it as a special order item  .

Well, by now if you have been following me, you know I will come up with my own solution. So adding acrylic blue to a gray was my plan.

My friend Mary helped me mix the blue and it came out just like I wanted, steel blue.

On to applying the grout! Mary had the great idea to insert glass beads into the little holes to give it a touch of glam. So I did that as I was applying the grout. Then I removed the excess with wet sponges and let it dry.

Here is the floor all done and dry and I love how it turned out. Now we can install the toilet and the sink cabinet, etc.

Closer look. Now, I have to plan the other bathroom floor

I had done the same idea for the outside concrete table. This is under the gazebo. It's a great way to use left overs and cheap too.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Frequently asked questions
Have a question about this project?
  2 questions
  • Clayton Clayton on Dec 24, 2020

    Broken tiles have a sharp edge, unlike whole tiles which are smooth. How do you prevent accidents when walking on this floor? The floor is beautiful, though!

  • Joyce Joyce on Jan 17, 2021

    Hi Carolina - Beautiful floor! Do you seal it afterwards? If so, with what?


Join the conversation
3 of 40 comments
  • Robyn Garner Robyn Garner on Dec 25, 2021

    Carolina, thanks so much for not only letting me know you appreciated my post but also adding that you love the take on your design detail. Too often I take time to give feedback and peeps ignore it. I'm so happy you gave me a TY for writing you! 🥰

  • Destinys Digitals Destinys Digitals on Jul 31, 2022

    Its stunning! But I don't have the patients for something like this. I'd hire you to do it for me though.. great job!