Industrial Shelves {a How-to}
by
McCall Manor
(IC: blogger)
These shelves made a big impact and have given great storage in our guest bathroom...and they were easy. Here is a step by step how-to so that you can go into this project with full confidence that you will rock this out!
shopping list: 2x8x8 boards cut to 2' lengths. I only used 3 of my 4 for this project.
Hold your first flange up where you want to place it and mark the holes with a pencil. Then drill holes large enough to fit the mollies you purchased.
Tap the mollies in the walls.
Screw flange, pipe and end cap to the wall.
Used a level to make sure your next flanges line up vertically and horizontally.
Stand back and smile in a smug I-totally-rocked-this-project kind of way.
Load up the shelves with whatever pleases you.
For more pictures of my finished project and many others, hop over to my blog, McCall Manor. Thanks for stopping by!
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published September 12th, 2015 9:02 PM
Comments
Join the conversation
3 of 6 comments
-
McCall Manor on Sep 14, 2015Thank you Hannah! You are always so sweet!
-
-
Pat whitmus on Oct 03, 2015I am seeing the pipe/flange idea a lot and really like it...after we get home nxt spring i am going to do this in my craft room!
-
Frequently asked questions
Have a question about this project?