A Modern Spin on Testers
by
Quince_Cottage
(IC: blogger)
We wanted to give our master bedroom a real focal point, and this relatively easy DIY sure did the trick!
First, we measured the wall to see just how much fabric we needed to make a ceiling to floor, full-looking curtain AND a shorter valance. We used two panels of 54" wide fabric in this lovely fern print. Along the edge of the valance I stitched this fun coordinating trim!
Unless you're lucky enough to hit studs every time, you'll need wall anchors. Sorry for the blurry photo...
Here are the curtain rods we used. Nothing fancy, as you can see. The fabric covers them completely.
Once the mounting hardware was installed, we put up the drapes.
As you can see, we had some help. Cough.
And, ta-daaaa! Here's the finished look!
Here's another. Stay tuned for a bedding project we have in the works!
For more pictures of cute terriers and more DIYs, recipes, etc. check out our blog!
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published September 18th, 2015 7:09 AM
Comments
Join the conversation
2 of 155 comments
Frequently asked questions
Have a question about this project?