does anyone have any ideas on removing 16x16 tiles off denshield without breaking them?we are tryiong to reuse some of
-
Woodbridge Environmental Tiptophouse.com on Dec 07, 2011Not going to be very successful if they were properly fastened down. Once the thin set hardens your going to be pretty much out of luck.Helpful Reply
-
-
Terry S on Dec 07, 2011they have been down about 10 yrs , redoing kitchen etc. and dont want to replace 550 sq.ft. of tile. we were hoping to patch?Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Dec 07, 2011If your doing the kitchen over and the cabinets are going in new places that uncover areas that do not have tiles. You can create a border with a complementary tile and then simply go all the way around the kitchen so it looks as though it was that way from the beginning. Many times when tile cracks in kitchens and its no longer around. People simply place another new tile that complements the older then they remove more to create a pattern look. Just how many are you thinking about removing and moving?Helpful Reply
-
-
Terry S on Dec 07, 2011thank you . we will have most of the cabinets in the same areas,but we are downsizing our island and making a walkway about a 9 sq ft area around it instead of it being attached to the wall. i think i may have enough for that but may need to fill other areas and was hoping there was a solution to pulling up some of the existing tiles in a seperate entry and also using those. they are the same as the kitchen is now.Helpful Reply
-
-
Hewitt Remodeling Services LLC on Dec 07, 2011Terry, As Bob said, if they were installed correctly, it is almost impossible without microsurgery" and a month of Mondays...especially with the larger 16" tiles. Consider going with a complementary tile. TimHelpful Reply
-
-
Harold M on Dec 07, 2011I tried this once and found out it was easier and more cost effective to tear them up and install new. Unless your talking about alot of sq. footageHelpful Reply
-
-
Terry S on Dec 08, 2011the problem is the open floor plan.and 550 sq ft of the same flooring. i think im going to try a dremel tool and a putty knife and hope for the best.i appreciate everyones input.Helpful Reply
-
Related Discussions
Which past home decor design trend would you love to see return?
Let's take a trip down memory lane and revisit some classic home decorating trends!Whether it's the bold patterns of the 70s, the sleek lines of mid-century modern, o... See more
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more
How do I fix a cracked polyethylene planter?
I dropped an empty planter (not terra cotta) and it has a thin crack. I need an easy way to fix it so I can use it. If there isn't an easy way, how could I upcycle i... See more
Best way to make your driveway look like stone with paint?
Several years ago there was a DIY video on how to do this but can't fine it.
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Toilet: Rumbling / Vibrating Noise when FILLING up (SMOOTH when flush)
When flushing the toilet, no problem, smooth flush like all others, no issues. (My 1st inclination of the noise when filling up was a clogged toilet, but it flushes q... See more