does anyone have any ideas on removing 16x16 tiles off denshield without breaking them?we are tryiong to reuse some of
-
Woodbridge Environmental Tiptophouse.com on Dec 07, 2011Not going to be very successful if they were properly fastened down. Once the thin set hardens your going to be pretty much out of luck.Helpful Reply
-
-
Terry S on Dec 07, 2011they have been down about 10 yrs , redoing kitchen etc. and dont want to replace 550 sq.ft. of tile. we were hoping to patch?Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Dec 07, 2011If your doing the kitchen over and the cabinets are going in new places that uncover areas that do not have tiles. You can create a border with a complementary tile and then simply go all the way around the kitchen so it looks as though it was that way from the beginning. Many times when tile cracks in kitchens and its no longer around. People simply place another new tile that complements the older then they remove more to create a pattern look. Just how many are you thinking about removing and moving?Helpful Reply
-
-
Terry S on Dec 07, 2011thank you . we will have most of the cabinets in the same areas,but we are downsizing our island and making a walkway about a 9 sq ft area around it instead of it being attached to the wall. i think i may have enough for that but may need to fill other areas and was hoping there was a solution to pulling up some of the existing tiles in a seperate entry and also using those. they are the same as the kitchen is now.Helpful Reply
-
-
Hewitt Remodeling Services LLC on Dec 07, 2011Terry, As Bob said, if they were installed correctly, it is almost impossible without microsurgery" and a month of Mondays...especially with the larger 16" tiles. Consider going with a complementary tile. TimHelpful Reply
-
-
Harold M on Dec 07, 2011I tried this once and found out it was easier and more cost effective to tear them up and install new. Unless your talking about alot of sq. footageHelpful Reply
-
-
Terry S on Dec 08, 2011the problem is the open floor plan.and 550 sq ft of the same flooring. i think im going to try a dremel tool and a putty knife and hope for the best.i appreciate everyones input.Helpful Reply
-
Related Discussions
How do I get grass out of a phlox bed?
This flower bed is extremely dense with phlox. Last year, I pulled much of the grass out by the roots, but it came back with a vengence this year. We've had a ton of ... See more
Has anyone used a shower liner for curtain backing/liner?
I'm making new curtains in several rooms using cotton calico fabric. I'm trying to find an inexpensive -as possible lol- way to give a little more weight to them and ... See more
How can I remove a magnetic door knocker from a metal door?
The magnet in the knocker has "welded" to the door and seems impossible to remove. I have to paint the door so if the paint is damaged its not a problem.
How to remove rust from exterior door hinges without removing them?
GNATS - How to get rid of them?
Somehow my house and garden got tiny gnats that killed my fuchsia plant and fly everywhere. I have tried ALL the Web recommendations - soap and oil dishes, sand in th... See more
How do I remove hard water deposits from stainless washing machine tub
My new home's washing machine appears to have a rough buildup near the top of the stainless tub. I have run Affresh through the unit but this remains. I don't want to... See more
How do we remove calcium deposits on our patio water fountain
How do we remove calcium deposits from our patio fountain and brick walkway?