does anyone have any ideas on removing 16x16 tiles off denshield without breaking them?we are tryiong to reuse some of
-
Woodbridge Environmental Tiptophouse.com on Dec 07, 2011Not going to be very successful if they were properly fastened down. Once the thin set hardens your going to be pretty much out of luck.Helpful Reply
-
-
Terry S on Dec 07, 2011they have been down about 10 yrs , redoing kitchen etc. and dont want to replace 550 sq.ft. of tile. we were hoping to patch?Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Dec 07, 2011If your doing the kitchen over and the cabinets are going in new places that uncover areas that do not have tiles. You can create a border with a complementary tile and then simply go all the way around the kitchen so it looks as though it was that way from the beginning. Many times when tile cracks in kitchens and its no longer around. People simply place another new tile that complements the older then they remove more to create a pattern look. Just how many are you thinking about removing and moving?Helpful Reply
-
-
Terry S on Dec 07, 2011thank you . we will have most of the cabinets in the same areas,but we are downsizing our island and making a walkway about a 9 sq ft area around it instead of it being attached to the wall. i think i may have enough for that but may need to fill other areas and was hoping there was a solution to pulling up some of the existing tiles in a seperate entry and also using those. they are the same as the kitchen is now.Helpful Reply
-
-
Hewitt Remodeling Services LLC on Dec 07, 2011Terry, As Bob said, if they were installed correctly, it is almost impossible without microsurgery" and a month of Mondays...especially with the larger 16" tiles. Consider going with a complementary tile. TimHelpful Reply
-
-
Harold M on Dec 07, 2011I tried this once and found out it was easier and more cost effective to tear them up and install new. Unless your talking about alot of sq. footageHelpful Reply
-
-
Terry S on Dec 08, 2011the problem is the open floor plan.and 550 sq ft of the same flooring. i think im going to try a dremel tool and a putty knife and hope for the best.i appreciate everyones input.Helpful Reply
-
Related Discussions
How do I remove super glue from a rubber floor mat?
I spilled glue on my rubber floor mat and have tried alcohol, soap, goop and some other things, but nothing took it all away.
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more
Cleaning mineral deposits off of glass
How do I remove mineral deposits from windows??? I've tried cleaning with vinegar on both the inside & outside of the windows...is it possible it's on the inside of t... See more
What to hang over fireplace?
Right now I have a cream colored berry wreath over my fireplace. I will be getting the picture shown over my sofa ( that is a mock up so size won't be exact). Do you... See more
Clean grout hard (iron) water stains?
We have a shower that has laminate side and flooring. The areas were grout is has turned orange/Black. I have used vinegar applied with toothbrush, Granite Gold grout... See more
Toilet: Rumbling / Vibrating Noise when FILLING up (SMOOTH when flush)
When flushing the toilet, no problem, smooth flush like all others, no issues. (My 1st inclination of the noise when filling up was a clogged toilet, but it flushes q... See more
How clean grout from a brick ?
hello all, I just moved to my new APT and I was working on my new kitchen. part of the work is to glue the bricks on the wall 1 centimeter apart so that the grout ... See more