Prefab handscraped hardwood floors vs. actual handscraped hardwoof floors -
-
Woodbridge Environmental Tiptophouse.com on Mar 23, 2013The quality of the higher end pre scraped planks are much better then anything you can get if you finish them yourself. However a good quality oil stain on a DIY hand scraped floor works really well also. My personal selection would be to purchase a high end pre scraped and finished floor.Helpful Reply
-
-
KMS Woodworks on Mar 23, 2013Actually the process is not the same. Flooring that is purchased as "pre scraped" typically has a better more consistent finish. In most cased this is a ceramic oxide type finish, which is a bit more durable than the basic finish applied "in house". You will also have the "look" being different. Planks that are scraped in the factory are scrapped as individual planks, then finished. When these are installed the edges and ends will have a more random pattern. Flooring that is installed THEN scrpped will have the scrap pattern cross one or more board joints. Clearly showing it was scrapped "inhouse". Factory "hand scraped" is often "machine" scraped as this is in a production factrory environment. The "hand" scraping in house generally is actual hand work...so there is an added cost for labor. The look of hand scrapped is a "fashion" tend and may or may not be in style over the life of the floor. This process is also something that reduces the over all life of the floor. The scrapping process removes relatively large bits of wood. And in the future if the homeowner wants a smooth floor, then level of sanding is much greater to make it all smooth. This removes more wood than a basic sanding. The durability of a floor varies by the wood itself and the finish that is applied. Check out this article I wrote on floor finishes. http://www.networx.com/article/exotic-wood-floor-finishes-you-havent-s and a blog post I did on bamboo and wood durability http://kmswoodworks.wordpress.com/2010/04/18/the-great-green-washing-of-bamboo-flooring/ My hands down favorite is a good dense wood like Jatoba finished with a penetrating oil finish. This is what I used in my master suite. As seen in this pic http://www.flickr.com/photos/kmswoodworks/4497266296/in/set-72157623787645678Helpful Reply
-
-
Marie Sanderson on Mar 25, 2013Thank you for your replies. Very helpful information.Helpful Reply
-
Related Discussions
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How can I get evergreen climbing vines that don't attract bees?
Need privacy screen I can train on trellises for my patio. There's lattice there, but not enough to block out neighboring home. This is a mobile home. Would love flow... See more
I am gluing some colored glass gems onto a glass window..
I am using E6000 to attach the glass gems to an old window. I want to make sure that everything will stay attached. I plan on spraying clear Krylon onto the whole gla... See more
How do I get the black marks off my composite deck?
As we all know New England is getting hammered with snow this year! And I had so much snow on the deck that I had to use the snowblower to get it off. I'm anticipatin... See more
How do I remove a rust stain from a wooden deck?
How do I remove a large, deep rust stain from a metal pan off my stained wooden deck?
How do I get grease stains off of composite decking material?
I have a bbq rug under the grill but I ended up getting some grease on the material anyway. Any idea?