When tiling a bathroom floor, shower pan, and wall, should I grout the floor before the curb, and then the wall?
-
KMS Woodworks on Jan 27, 2012I normally start low and work my way up. You may want to do this in a few days work rather than all at once...if the gout starts to get too stiff its hard to keep up. For baths I try to do about 50 to 60 sq feet at a timeHelpful Reply
-
-
Dan's of Central Florida, Inc. on Jan 27, 2012The order does not really matter all that much really. Personally I like to work opposite from what KMS does, from the top down. My reasoning is that any grout I may drop on the floor does not have any affect on any grout already installed in the floor (since there is none). Plus I just want to avoid standing on a freshly grouted floor.Helpful Reply
-
-
Renovation by Design on Jan 28, 2012I grout the pan floor & curb then the walls. When you miv your grout they tell you to wait 15 minutes and then remix. This is because the grout starts to get hard if you don't. I mix once grout the shower pan floor while my grout is runny. Then when my grout starts to harden I remix & grout the walls. This enables grout to flow into all of the shower floor voids while still avoiding overwatering the grout. Grout is harder like cement, when mixed drier. http://www.cwremodelcontractor.comHelpful Reply
-
-
Suzie on Jan 28, 2012Thanks for all the good advice. I bought an additive to use in place of water for the grout. I was told by the store clerk that the pot life is the same if just water is used. Is he right?Helpful Reply
-
-
KMS Woodworks on Jan 29, 2012I have only used the add mix a few times..have not noticed much difference one way or the other.Helpful Reply
-
Related Discussions
How can I get evergreen climbing vines that don't attract bees?
Need privacy screen I can train on trellises for my patio. There's lattice there, but not enough to block out neighboring home. This is a mobile home. Would love flow... See more
I am gluing some colored glass gems onto a glass window..
I am using E6000 to attach the glass gems to an old window. I want to make sure that everything will stay attached. I plan on spraying clear Krylon onto the whole gla... See more
How do I get the black marks off my composite deck?
As we all know New England is getting hammered with snow this year! And I had so much snow on the deck that I had to use the snowblower to get it off. I'm anticipatin... See more
How do I remove a rust stain from a wooden deck?
How do I remove a large, deep rust stain from a metal pan off my stained wooden deck?
How do I get grease stains off of composite decking material?
I have a bbq rug under the grill but I ended up getting some grease on the material anyway. Any idea?
How to remove Behr Deckover?
We used Bher Deck over about 5 years ago. It is peeling and fading in places. We have tried to remove it. It is almost impossible. HELP!
How do you remove an oil stain from composite decking?
I moved a snow blower to my composite porch for the up coming winter. After it was moved I noticed it had dripped engine oil on the deck and it soaked into the compos... See more