can a moen posi temp shower n tub be changed out to a Delta shower n tub assembly? Without having to cut/tear out wall
-
KMS Woodworks on Feb 14, 2012In nearly all of the retros I've done I rework the supply and returns which normally lie outside the 5-6" hole that the valve comes through. If you have access to the back of this wall you may not need to mess with the tile.Helpful Reply
-
-
HandyANDY - Handyman & All Repairs, LLC on Feb 14, 2012Hopefully you are lucky and you have a closet directly behind the tub...if you do, get the larger Oakly plastic access panel from Lowes or Home Depot and cut yourself the access you need through the drywall. You can then install the panel with two screws & you'll have permanent access to the area without bothering with your shower tile. We use these alot and you can paint them to match the wall.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 14, 2012Just like KMS said. You will need to open the wall to do the plumbing. The size of this demo would be determined by the quality of the plumber and his or her experience in doing this type of work. There are several custom retrofit covers with over sized plates that can be used when doing this type of valve change. Check with the plumbing and bath supply store, your not going to find this at your local big box store.Helpful Reply
-
-
Baby H on Feb 14, 2012Hmm well there is no access panel so it sounds to me like I have to stick with a Moen posi temp assembly. Thanks everyone.Helpful Reply
-
-
KMS Woodworks on Feb 15, 2012If the valve is leaking or not working well, just a "cartridge" swap will usually do the trick. Swapping out the valve "body" would be just as invasive as a complete new installHelpful Reply
-
-
HandyANDY - Handyman & All Repairs, LLC on Feb 16, 2012What's behind the shower?Helpful Reply
-
-
Baby H on Feb 16, 2012KMS at the moment the shower assembly is working fine although very worn. The bathroom faucet and vanity top has some serious wear an tear and I'm going to change out the top and faucet. The shower and tub assembly is worn but works. Since I was going to replace and update the vanity area I wanted to go from the old "GOLD" faucets to brass in the shower area also. To keep it matching HandyAndY the Garage. ThanksHelpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Feb 16, 2012Baby H, If the garage is behind the shower area it is not difficult to cut out and replace the Sheetrock on that area of the wall. Unless of course you have all sorts of cabinets etc on the wall. Have you thought about doing it this way? Also you can install a access panel when removing the wall board that you need to gain access. This will allow you in the future to regain access to that area should you ever need to address the faucet issue again.Helpful Reply
-
-
KMS Woodworks on Feb 17, 2012You might be able to get a "new" knob and trim kit to make it look new. Swapping out a spout is pretty easy too.Helpful Reply
-
-
Baby H on Feb 17, 2012KMS I went to their website once I got a few questions thrown at me asking about what type it was etc. So supposedly if you get the same type you have installed but just a different style/color I should be fine. I will see. Woodbridge it is in the cuby whole area where there are a few shelves so I won't want to go that way unless one day truly breaks/leaksHelpful Reply
-
Related Discussions
What to do with the top of this piece of furniture?
I am planning on using the bottom as a credenza in my dining room any suggestions what I can do with the top?
How to get rid of tomatillos bugs?
Sow tomatillos this year, and couple days i notice it they are been bitten i look around and i found some disgusting creatures, I've healthy plants besides these inci... See more
Can You Name These Michigan Weeds? Are they, indeed, weeds?
The annual invasion is upon me... and I don't even know their names and I am not even sure that they are weeds.... can anyone identify/name these weeds? Some are even... See more
Cleaning mineral deposits off of glass
How do I remove mineral deposits from windows??? I've tried cleaning with vinegar on both the inside & outside of the windows...is it possible it's on the inside of t... See more
What is a good adhesive to use on a wreath in a very hot location?
I have a front door that faces west and gets very hot in the summer. I made a wreath of twigs and sea shells.The hot glue melted, causing the shells to fall off. I tr... See more
What to hang over fireplace?
Right now I have a cream colored berry wreath over my fireplace. I will be getting the picture shown over my sofa ( that is a mock up so size won't be exact). Do you... See more
My purple clematis was supposed to be pink
I knew I wanted a clematis and I knew I didn't want it to be purple. So I went to Rural King and found me three pink Bee's Jubilee.