I am remodelling my bathroom, the backwall of my backplash is not straight the drywall curves about 1/2 inch.
-
KMS Woodworks on Mar 16, 2012What type of back spash are we talking here? Tile is often used as it conforms to the wall better. Straight and solid materials are caulked. The best method however would be to correct the crappy drywall...this is done by shimming the stud so the wall is flat.Helpful Reply
-
-
Designs by BSB on Mar 16, 2012KMS question is the most important, what is the material?Helpful Reply
-
-
Johnny J on Mar 16, 2012Material is resin with mixed with marbles. Enginered material?Helpful Reply
-
-
KMS Woodworks on Mar 17, 2012Johnny J....that stuff will not "bend" too well. If it were me I would fix the crappy drywall...(I'm not much for band-aid type repairs). The majority of DIY folks however would simply caulk it. If the gap is more that about 1/4 inch you would be well off to use a "backing rod" this is a foam "pencil shaped" roll of material that fill the bulk of the gap. This allows for a thinner more flexible caulk line to be applied.Helpful Reply
-
-
Designs by BSB on Mar 17, 2012another option is to cut into the drywall where the splash is. Not the best option, but it is one!Helpful Reply
-
-
Johnny J on Mar 17, 2012You can see the bowed wall just above the backsplash, but I think I found a solution. I will nail down or screw on a piece of decorative wood to hide the gap. I will give an update if it is resolved.Helpful Reply
-
Related Discussions
How to remove burnt pasta stuck at the bottom of a pot?
Burnt pasta stuck at bottom of pot - how to clean a burnt pot to remove the food?
My toilet handle stays down when you flush and the water keeps running
how do I fix my running toilet?
How effective are bay leaves for ants?
I'm dealing with a terrible ant infestation, and I heard that bay leaves can be a great way to keep them away. Do you know if that's true? If it is, how can I use bay... See more
If I put bleach in my fountain to kill mosquitos will it harm the bird
Rocking chair
I bought this rocking chair 31 years ago when my son was born. It's time to do something with it. Looking for ideas.
How can I refresh an old ugly lampshade?
How can I refresh an old cloth lamp shade that has just gotten stained & ugly over the years. The shade is a strange shape so I need an easy solution. Any ideas? Than... See more
How do I decoupage old glass bulb covers from light fixtures?
I need ideas for updating hanging light fixtures in kitchen then have the brass colors and clear glass cone bulb covers. I’d like to decoupage the glass covers ?