How do I get the wrinkles and fold marks of a 8x10 rug that has been rolled up
-
Susan S on Mar 29, 2012Hi Judy - I'm sure there are lots of people on HT who have had experience w/something like this and will no doubt offer professional advise. I'm not quite sure I'm getting the whole picture - has this rug been rolled AND FOLDED??? After the fact but I would think a rug should probably NEVER actually be folded but if that is the case it may just take time for the fibers to start blending after having been folded. The crease would cause the fibers to bend in opposite directions. Lay the rug out and vacuum thoroughly, maybe take your hand and "massage" the creased fibers to help them relax and start to reform into their natural pre-folded position. Not knowing the fiber content (there is probably a tag on the underneath telling you) I would be reluctant to suggest anything like steam but for future reference, Please do not FOLD CARPETS. Good ole fashioned time is probably your friend in this case, walking on it and eventually it'll lay flat.Helpful Reply
-
-
KMS Woodworks on Mar 29, 2012Folding is bad...no matter how you slice it. I have seen some what better looks after a carpet has been "cleaned" be it a simple rental hot water machine, fancy truck mounted steaming systems to even the garden hose on the deck. It is the moisture in these cases that bring it around... kind of like in the old day before permanent press fabrics came into regular use. Wrinkled laundry could be sprinkled with some water and dried again...when removed in a freshly moistened and warm state the wrinkles could be smoothed out.Helpful Reply
-
-
Culpepper Carpets and Interiors, Inc. on Mar 29, 2012If it has a latex backing, lay it outside in the hot sun. If that is not enough, wet it on the bend and leave it in the hot sun for a few hours. If it is wool with no backing, the fold will fall out in a few days.1 marked as helpful Reply
-
-
Judy V on Mar 29, 2012OK. DID not explain explain good at all. Sorry These are rugs we bought and they are rolled .Just wondering how to make it lay flat1 marked as helpful Reply
-
-
Pat S on Mar 29, 2012I have always just unrolled it and placed something heavy in any spots that I may trip over and within a few days it is flat. I've also put them down upside down when it seemed to roll/curl that way.1 marked as helpful Reply
-
-
Judy V on Mar 29, 2012GOOD IDEA,THANKSHelpful Reply
-
-
Susan S on Mar 29, 2012So we all solved nonexistent issues right??? That's ok, cause IF you ever do have fold creases in a carpet you'll sure know how to fix it - besides to not fold it in the first place!! LOLHelpful Reply
-
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How can I clean/fix black spots caused by dog urine?
Which room would you pick for a room makeover in your home?
We're curious, if you could redesign any room in your home, which is the room you would choose?Whether it's your cozy living room, your bustling kitchen, or even your... See more
How do I stop the pitting on my stainless steel refrigerator?
I have a 7 month old Frigidaire brand stainless steel refrigerator and I noticed pitting and rust spots numbering somewhere around 30 or 40. Is there something I can... See more
How do I replace rotting trellis?
I have trellis separating my garden, it has climbers growing through it. The trellis has started to rot and one post has snapped. What would you replace it with? I li... See more
I had soaked my gas stove top in bleach overnight.it has turned black
please advise on how to cleanThank you