Rust Restoration
by
Reposhture Studio - Kim
(IC: blogger)
Easy
I picked this rusty fire pit out of the bowels of trash hell! I wanted to use it outdoors as a hanging light or fill it with sedum as a vertical garden. But in order for it to not eventually disintegrate, I had to do some restoration.
You can do this with anything rusty that you want to be able to use but not have it continue to rust. This process is sooo simple! See the pictures for explanation and then get to it! I can NOT decide if I still want to use it outdoors or if I want to use it inside as my kitchen light! If I transform it further, I'll let you know
Disclaimer: You CANNOT use this again as a fire pit! Linseed oil is flammable as is polyurethane.
You can do this with anything rusty that you want to be able to use but not have it continue to rust. This process is sooo simple! See the pictures for explanation and then get to it! I can NOT decide if I still want to use it outdoors or if I want to use it inside as my kitchen light! If I transform it further, I'll let you know
Disclaimer: You CANNOT use this again as a fire pit! Linseed oil is flammable as is polyurethane.
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published May 21st, 2013 9:52 PM
Comments
Join the conversation
2 of 40 comments
-
Syl28174573 on Nov 09, 2017
After the boiled linseed oil is dry do you sand it off or just cover it with the next step.
-
-
Savvysalli on Nov 24, 2018
Or fill the bowl with white vinegar. Let it soak (I usually do 24hrs as I have plenty of other things to get on with). Pour off vinegar and save for next rusty things. Clean up with wire brush. Finish as usual.
-
Frequently asked questions
Have a question about this project?
Does the linseed oil have to be boiled,or does it come that way?
So simple! I am going to try this on an outdoor cast iron pot. What gave this idea for a solution?
Thank you