what to do to prepare slice of tree for table project
-
John P on Apr 02, 2012seal the end grain with a good sealer and let the pc air dry or send it to be kiln dried down to about 7% moisture then it will be ready for planing and finishing also make sure it is stored flat and level and wieghing it down can help alsoHelpful Reply
-
-
KMS Woodworks on Apr 02, 2012End grain slabs tend to check or split more so than vertical "slabs" I would seal it up with some Anchor Seal...let it dry for a good long spell (normal air dry times are 1 year per inch of thickness) once dry some good sanding and a number of finish coats. end grain will absorb much more finish and it will take some time to get a "finish build" going. With a product like Minwax's wiping poly about 7-8 coats http://www.uccoatings.com/products/anchorseal2Helpful Reply
-
-
Elinor A on Apr 02, 2012Thank you for the suggestions but this doesn't answer my question because the entire piece is end grain this is a horizontal slice thru the main stem close to the bottom of the tree. and when you say seal what is considered a good sealer thanks for all your helpHelpful Reply
-
-
John P on Apr 02, 2012band it with a good wide ratchet strap and let it dry i would say approx 9 months to a year you want it to be under 8% moisture for best results then sand stain and seal it will take a few coats of sealer a good poly resin works well alsoHelpful Reply
-
-
KMS Woodworks on Apr 03, 2012Elinor...the Anchor Seal I Mention above has been the "industry" standard for sealing end grain on lumber for 30 years or so. When I purchase lumber for turning projects nearly every piece is sealed on all six sides with anchor seal. I have seen anchor seal for sale on ebay and amazon as well as many woodworking supply sites. John's idea above about a ratchet strap is a great idea...the log slice should be stored on its side so the seal ends are open to the air and not resting on some surface. I have worked with smaller sized "slices" for various projects. My girls call the really small 2" dia ones "tree cookies" The largest end grain round I have worked with was about 14". Bigger than that and it will not fit my lathe. Some of the longitudinal slabs I have worked with were 6 to 8 feet long and up to 2' wideHelpful Reply
-
Related Discussions
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more
Cleaning mineral deposits off of glass
How do I remove mineral deposits from windows??? I've tried cleaning with vinegar on both the inside & outside of the windows...is it possible it's on the inside of t... See more
What to hang over fireplace?
Right now I have a cream colored berry wreath over my fireplace. I will be getting the picture shown over my sofa ( that is a mock up so size won't be exact). Do you... See more
Clean grout hard (iron) water stains?
We have a shower that has laminate side and flooring. The areas were grout is has turned orange/Black. I have used vinegar applied with toothbrush, Granite Gold grout... See more
Toilet: Rumbling / Vibrating Noise when FILLING up (SMOOTH when flush)
When flushing the toilet, no problem, smooth flush like all others, no issues. (My 1st inclination of the noise when filling up was a clogged toilet, but it flushes q... See more
How clean grout from a brick ?
hello all, I just moved to my new APT and I was working on my new kitchen. part of the work is to glue the bricks on the wall 1 centimeter apart so that the grout ... See more
I need a fabric stiffener that is weather resistant. Any ideas?
I created a fabric wreath and have tried two different brands of fabric stiffeners that have failed, any help appreciated.