We were told we need to have a licensed plumber pull a permit and do a Gas Line Pressure Test. What's involved in this t
-
Woodbridge Environmental Tiptophouse.com on May 05, 2012Unless something is different in GA then in most states a home owner can pull their own permits and do the work themselves. A pressure test is simply plugging the gas pipe at each end and putting about 15 lbs of air pressure in the line. An attached gauge is installed and the inspector comes out to read it once its set and under pressure and comes back next day and reads it again. No pressure drop, no issue. Also if the gas pipe is entirely exposed and is not being buried behind a wall, some inspectors will approve without pressure test. In any regards its simple. We use nitrogen when we test as it does not change pressure with air temps. Compressed air goes higher in pressure when it warms out.Helpful Reply
-
-
Kevin M. Veler, Law Office of on May 07, 2012IRC G2417 requires gas pressure test for inspection. I am sure our contractors can tell you what is required. I am assuming you are having work done on a new gas line or modifying an existing line. Generally YOU, the homeowner, does not want to pull the permit because that makes YOU responsible for code compliance. The contractor who is performing the work should pull the permit and obtain the inspection. Not sure which part of the city you are in but you can find out more about these inspections online. For example, http://www.alpharetta.ga.us/index.php?p=228 allows you to download the Residential Building Inspections Policies and Procedures from their website. If you have more questions about the inspection, call your local building inspector. I have found that most of them are very helpful and want you to understand that code compliance is for your safety.Helpful Reply
-
-
Rikki Burn on Nov 28, 2012The best thing to do is get a <a href="http://chapmanplumbingal.com">plumbing contractor</a> over to your house and get details, even calling to get details would be a good idea. At least you'd be speaking to an experienced professional. Good Luck!Helpful Reply
-
Related Discussions
How to make homemade ant poison?
I've been diving into the world of DIY solutions lately and stumbled upon homemade ant killers. I'm curious to know if any of you have tried making your own homemade ... See more
What could be causing a wet floor, if a plumber finds no leaks?
wet floor under sink dry iu and run water no leak? no smell all is clean. run water both tubs, garbage disposal, use sprayer everything underneath stays dry. Go away ... See more
How to keep critters from getting under a mobile home?
An animal got through the skirting on my mobile home and died. My place had a terrible odor for two months since I couldn't locate the intruder. Is there an easy way ... See more
What can I put on my wooden pool deck to minimize the hot surface?
What can I put on my wooden pool deck to minimize the hot surface. I do not want to use regular carpet as it holds water and my deck is hugh.
How can I protect my door-casing from my power wheelchair?
My doorways are being ruined by my power wheelchair. It's more than just scratches in the paint. I have deep gouges in the wood. Before I try to get these filled and ... See more
How do you get a suction cup bath mat to stick to the tub?
How do I decoupage old glass bulb covers from light fixtures?
I need ideas for updating hanging light fixtures in kitchen then have the brass colors and clear glass cone bulb covers. I’d like to decoupage the glass covers ?