What size cable would I need to run 200 amp service 110 feet to a shop?
-
Woodbridge Environmental Tiptophouse.com on May 07, 2012Above ground or under ground in pipe? Aluminum or Copper?Helpful Reply
-
-
Brighten Electric, Inc. on May 10, 2012Run 250mcm AL if you plan on really loading the panel up with welders compressors etc... run 300mcm AL. If your rich run 3ott or 4ott copperHelpful Reply
-
-
Ray L on May 10, 2012I'm thinking about under ground, but it may have to be run elevated between poles.Helpful Reply
-
-
Ray L on May 10, 2012Thank you Woodbridge and Brighten.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on May 11, 2012If the application is residential,smaller wire sizes are allowed, per NEC Table 310.15 B6, which states 200 amp service or feeder can be either # 2/0 copper or 4/0 aluminum. However, if you are underground, larger is better as heat generated by the wire cannot be removed, Overhead wires have the advantage of cooling to the air that surrounds them. if overhead also wire can not be lower then three feet over building, with roof pitch less then 24 on 12, or at least eight feet from flat roof. And service connections and wires cannot be reached from windows by at least three feet. 10 feet above highest walking level, 12 feet above residential property and 18 feet above streets, alleys or parking areas.Helpful Reply
-
-
Brighten Electric, Inc. on May 11, 2012310.15 is for dwellings not shops that are detached from the home. Don't use that chart! Put your wire under ground if you have the choice and put it in conduit like 2-1/2in pvc sch40. Remember always check your local codes before taking any of our advice.Helpful Reply
-
Related Discussions
How can I fill a gap between the wall and floor?
Just had floors put in but there’s some gaps.. should I fill in with wood filler to match floor (floors are vinyl) or caulk.. the first pic is where I tried caulkin... See more
Does anyone know about Lane furniture?
Someone was throwing this table out the other day. It had a few coffee stains and was a little worn down, but overall in good shape. I just started sanding it and rea... See more
How do I clean rubber coated wire closet shelves?
They are sticky and covered with dust too.
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Which past home decor design trend would you love to see return?
Let's take a trip down memory lane and revisit some classic home decorating trends!Whether it's the bold patterns of the 70s, the sleek lines of mid-century modern, o... See more
whats the cheapest and most efficient way to clean mildew from vinyl siding on a doublewide mobile home?on a budget
How do I clean dull vinyl siding?
I've had my vinyl siding power washed, but it is still dull, like oxidized or something. Is there a cleaner I can use?