What size cable would I need to run 200 amp service 110 feet to a shop?
-
Woodbridge Environmental Tiptophouse.com on May 07, 2012Above ground or under ground in pipe? Aluminum or Copper?Helpful Reply
-
-
Brighten Electric, Inc. on May 10, 2012Run 250mcm AL if you plan on really loading the panel up with welders compressors etc... run 300mcm AL. If your rich run 3ott or 4ott copperHelpful Reply
-
-
Ray L on May 10, 2012I'm thinking about under ground, but it may have to be run elevated between poles.Helpful Reply
-
-
Ray L on May 10, 2012Thank you Woodbridge and Brighten.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on May 11, 2012If the application is residential,smaller wire sizes are allowed, per NEC Table 310.15 B6, which states 200 amp service or feeder can be either # 2/0 copper or 4/0 aluminum. However, if you are underground, larger is better as heat generated by the wire cannot be removed, Overhead wires have the advantage of cooling to the air that surrounds them. if overhead also wire can not be lower then three feet over building, with roof pitch less then 24 on 12, or at least eight feet from flat roof. And service connections and wires cannot be reached from windows by at least three feet. 10 feet above highest walking level, 12 feet above residential property and 18 feet above streets, alleys or parking areas.Helpful Reply
-
-
Brighten Electric, Inc. on May 11, 2012310.15 is for dwellings not shops that are detached from the home. Don't use that chart! Put your wire under ground if you have the choice and put it in conduit like 2-1/2in pvc sch40. Remember always check your local codes before taking any of our advice.Helpful Reply
-
Related Discussions
How do I fix a cracked polyethylene planter?
I dropped an empty planter (not terra cotta) and it has a thin crack. I need an easy way to fix it so I can use it. If there isn't an easy way, how could I upcycle i... See more
Can you make your own rain gutters?
I'm interested in creating homemade rain gutters for the second-floor balcony of my house, and I'd love to learn from your knowledge. Can you please share your DIY ra... See more
How do keep the plastic on solar lights from clouding over?
i have solar lights in my yard and i'm wondering how i can keep the sun from clouding the "glass" covers? the lights look so pretty!!! thnx!!!
How can I refresh an old ugly lampshade?
How can I refresh an old cloth lamp shade that has just gotten stained & ugly over the years. The shade is a strange shape so I need an easy solution. Any ideas? Than... See more