Problem with new grout. Additional question asked.
To add to above. This grout already contains a sealer, that is why you never have to seal. If the grout was not stirred properly or not at all when opened, could that affect the sealing properties in the mix?
-
KMS Woodworks on Jul 29, 2013Its my guess that this "darkness" is the start of some mold and mildew issues. A way to test this would be to scrub the area with a 1:4 mixture of bleach and water. You can check out this article I wrote for some other tips http://www.networx.com/article/start-cleaning-tile-grout-more-easilyHelpful Reply
-
-
Lynn C. on Jul 29, 2013Thanks for your suggestion. I already use the product 'Clean Shower' after each use. This grout is not suppose to have problems with mold or mildew. It does contain an antimicrobial also. Over and above that, it is only two months since it was completed.Helpful Reply
-
-
KMS Woodworks on Jul 30, 2013Most antimicrobial products don't do diddly squat in terms of reducing pathogens. The manufacturers sell this "hype" to uninformed and paranoid consumers. The bostic site states the grout needs to cure for a full 7 days before being subject to water, use or cleaners. The use of enzymatic cleaners will void all warranties, and the use of vinegar or acid cleaners is not recommended. As far as the "Clean Shower" product the active ingredients, and MSDS data is elusive. http://www.valdezlink.com/re/clean/cleanshower.htm I'm still thinking it is a early mildew / mold issue. Can you post some detail photos of the affected area compared to other non-affected areas? I did find a MSDS that lists the pH at 4 to 5 which is 100 to 1000 times more acidic than basic water. (Since pH is a log function) http://www.ahprofessional.com/msds/MSDS-127-CLEAN%20SHOWER%20DAILY%20SHOWER%20CLEANER.pdfHelpful Reply
-
-
Gail lichtsinn on Jul 30, 2013you need to contact the person who installed the tile and have him come look at it..He should be able to tell you whats wrong and if this is common problem..Or call a tile store and ask them..I would almost guess theres a few places where the gout does not meet the edge of the tile and water is getting behind it and wetting the grout..Might have a fungicide mixed in it also..Since you know the name of the product call the company who makes it and tell them whats going onHelpful Reply
-
Related Discussions
Getting rid of wild day lilies
Our yard is covered with wild (I assume, since we never planted them)day lilies which have taken over our yard. Short of blasting them with Roundup, is there anything... See more
How do I clean dull vinyl siding?
I've had my vinyl siding power washed, but it is still dull, like oxidized or something. Is there a cleaner I can use?
whats the cheapest and most efficient way to clean mildew from vinyl siding on a doublewide mobile home?on a budget
How to remove green mold and/or stains along vinyl siding of our house
Well, we did bad!!!! Having scrubs like hemlocks, and other flowering (forsythea) evergreen-like lower plans on the north face of our home has left green stains on si... See more
What can I do about north Florida lawn weeds in the fall?
What is the most effective way to deal with Florida lawn weeds during the fall season? Additionally, what recommendations do you have for the best year-round lawn car... See more
Can you put a bar of soap in a toilet tank?
I am always looking for a good cleaning hack and came across one where a lady put a bar of soap in the toilet tank. Before I try this out, I was wondering if it could... See more