We had our deck rebuilt last February, and stained last week. I'm not happy with it because the stamps on the wood show
-
'Raven E on Jun 12, 2012when working with stain and wood i always sand away the stamps before staining, i dont know if that is how normal people do it :D good luck!Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Jun 13, 2012The prep for the staining was not done correctly. If there is any stamps on the deck surface, they need to be cleaned off and the board(s) sanded to allow the stain to be accepted to the surface in an equal way. You may be able to sand those areas and re-stain them so they blend into the new finished surface. But do not wait to long as the stain will fade and the new stain will not match for some time after it is applied.Helpful Reply
-
-
KMS Woodworks on Jun 13, 2012Part of the problem lies in your lumber choice and how it was installed. Higher end decking is not stamped ( like tropical hardwoods) softwood lumber may or may not be stamped. When the lumber is installed the installer should have set the boards with the stamps facing down not up...I have yet to see lumber stamped on both sides. If the stamp side was exposed then it should have been prepped better...by sanding. I have found that 80 grit keeps the wood rough enough to prevent glossy areas when semi- or transparent stains are used. To fix this you will need to sand as Woodbridge mentioned above, ideally the sooner the better. To minimize the sanded look you will want the "feather" out the sanding edges.Helpful Reply
-
Related Discussions
How can I remove green mold or mildew from my old wood fence boards?
I have a lot of old thin wood fencing boards that I want to use as reclaimed wood for indoor walls and such. A lot of them are very green on the side that faced north... See more
What front door paint color would you avoid?
Let's have a little fun with front door colors! We all have our preferences when it comes to home decor, and that includes the color of our front door.But today, I wa... See more
How to remove cigarette smoke smell from my sewing machine?
I just bought a used sewing machine. Brought it home and wiped it down with Clorox wipes and they were dirty. Now the machine reaks of cigarette smoke. I tried vinega... See more
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more
Which past home decor design trend would you love to see return?
Let's take a trip down memory lane and revisit some classic home decorating trends!Whether it's the bold patterns of the 70s, the sleek lines of mid-century modern, o... See more
Best way to make your driveway look like stone with paint?
Several years ago there was a DIY video on how to do this but can't fine it.