HELP! Brown heat mark on unfinished wood island top
-
KMS Woodworks on Aug 10, 2013The wood has been "burned" and will need to be sanded out...You are lucky in that the wood in unfinished. If you have access to a Random Orbit sander I would start with some 120 grit and work out the burn...being careful not to work to intensely in one sopt and feather the edges out a bit. When I work in my shop I will sometimes get "burn" marks on hard maple from my table saw blade ( this can be due to being dull / dirty or from "binding" due to tension in some of the wood grain) I simply sand these dark areas away. Once you have sanded the spot out ( or the whole top to even up any patina or color diffs...treat the whole thing with some butcher block oil.Helpful Reply
-
Related Discussions
How do I remove the stubborn stains from gas stove?
How do I remove the stubborn stains from gas stove?
Is there any way to get scratches off of a plastic toilet seat cover?
How to make solar pool covers with pool noodles?
I saw small “Solar” pool covers made with pool noodles and black garbage bags. I was hoping to find the directions again.
How do we remove calcium deposits on our patio water fountain
How do we remove calcium deposits from our patio fountain and brick walkway?
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How do I stop the pitting on my stainless steel refrigerator?
I have a 7 month old Frigidaire brand stainless steel refrigerator and I noticed pitting and rust spots numbering somewhere around 30 or 40. Is there something I can... See more