Adding edge protectors to kitchen walls
-
Shari on Aug 26, 2013The edge protectors I've used in the past (in my former home) were clear plastic. I believe my husband just attached them with some dabs of clear silicone caulk. It was nearly invisible and held just fine.Helpful Reply
-
-
Z on Aug 26, 2013You can buy the clear plastic ones that have an adhesive already on them. Just peal off the paper and press in place.Helpful Reply
- See 2 previous
-
-
Shari on Aug 26, 2013Ahhh, now it all comes back to me after reading Becky's comment. Our edge protectors had the peel and stick adhesive but it only works if the walls are smooth. In our former home, the walls were plaster with a light textured finish. The adhesive wasn't enough to hold securely due to high and low areas in the plaster surface. They popped loose right away, thus the need for a few dabs of silicone caulk. If you have some other kind of edge protector without the peel and stick backing (which I suspect you must since your question indicates you're unsure how to affix them), I would think the silicone caulk would work to hold them in place without screws or nails. By the way, pretty paint color on your walls. :)Helpful Reply
-
-
Becky P on Aug 26, 2013we have used edge protectors also, they were peel and stick and held up just fine.Helpful Reply
-
-
Elizabeth on Sep 03, 2013The edge protectors we purchased are also clear plastic. However, they do not have peel & stick features, but they have screws--approx. 1 1/4 in. long. Our walls have a light 'orange peel' texture, but I'm thinking that Shari's idea re: using dabs of clear silicone may be the way to go. TY for all your feedback.Helpful Reply
-
-
Elizabeth on Sep 14, 2013I need a clarification about a response: For those who used clear silicone, how visible is it--even 'dries clear' products rarely dry totally clear? & did you put the silicone on in a fine line or did you 'dot' it on? If putting small dots of silicone, how far apart did you space them? DH is concerned that there will be visible spots of silicone, that would ruin the look of the med. aqua paint. Any suggestions re: application of the clear silicone? & did you put it directly on the wall & then slide the edge protectors onto it? Thanks!Helpful Reply
-
-
Shari on Sep 14, 2013Elizabeth, we used dots of silicone, not one continuous line. As far as how many dots... sorry but I don't specifically remember how many because it was quite a few years ago and in a house where we no longer live. I'd say it will depend on how long your edge protectors are. If they are 3 feet or less, 3 or 4 dots on each side of the L should most likely be enough (and you'll probably need to hold them tightly in place with painters tape until the silicone has cured). The silicone was slightly visible if you were standing there staring at the edge protectors but really, who is going to do that? I will say I am about as "OCD" about some things as you can get and these dots of silicone did not bother me in the least. I really didn't pay any attention to them and I doubt anyone else did either. In my opinion, for what it's worth, the edge protectors are going to be a lot more noticeable to people than the silicone will ever be. Maybe you could do a test by putting just one up with silicone to start with, just to see how it looks to your husband once it has dried. I think he will see that a few small dots of silicone are going to be far less noticeable than if you used the screws that came with your edge protectors. I don't think my obsessive-compulsive self would like seeing the screws, at all.Helpful Reply
-
-
Diane Read on Mar 10, 2015We used plastic projectors that had a removal paper to glue them onto the corner. They can be found in the wall paper area of your home supply store. Depending upon your budget, I would put in "wood" molding instead. It looks so much nicer than the plastic. Good luck.Helpful Reply
-
-
Darlenegreen on Jul 03, 2015I love them and we went ahead and got them in dark brown and they look fine in a kitchen which is yellow with dark brown. Sure helps with kids and bumping the corners... worth every penny. Just use silicone or whatever will work on your kind of background.Helpful Reply
-
-
Barbara Valenti on Jul 10, 2015I used the clear and I also used some form of glue or whatever I forgot right now. I them painted over them, the same color as the walls, which was a beige color. Been there for about 4 years and still look great. My bar stool would hit the door edge so this worked wonders.Helpful Reply
-
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Water damage on bathroom ceiling
I am about to patch up this water damage on a low bathroom ceiling. What can i paint/seal the entire ceiling with to minimize future water damage? the ceiling is very... See more
Brown paper floor/wall help
I have purchased a brown roll of paper because I wanted a consistent "vein" look through out the walls and the brown paper bags I was getting would sometimes be "vein... See more