Want to build a flower box for my patio; where would I find plans on t
-
KMS Woodworks on Aug 28, 2013Building a box is pretty simple...so detailed plans are not really needed. More importantly are the material choices used to build it. Soggy dirt is very heavy and if thinner stock is used it can bow out and self destruct in a few years time. Wet soil against wood is also a quick road to failure do to rot. Lining the box with metal will help a lot in the rot dept. A flower box 5 feet long and 16" deep and 18" wide is HUGE and would weigh in at hundreds of pounds when filled with dirt. Remember that a 40 pound of potting soil is only .5 cu feet. Your dimensions would require at least 10 to 15 bags. This is 400 to 600 pounds worth. Once filled it will be near impossible to move about. Some folks will fill the lower parts of a big box with sytrofaom packing peanuts, then layer some landscape fabric over this. This greatly cuts down on the weight and soil needed. It is important though to use the old style "Styrofoam" not the newer "green" versions made from corn starch ( these dissolve in water).Helpful Reply
-
-
Betty819 on Aug 28, 2013I have a picture of what I want it to look like which came from a magazine that has the Initials as FC and date and I assume it is from Family Circle magazine about 5- 10 years ago. Only the picture and I know most outdoor flowerboxes are usually made of cecar but know that wood is very expensive. Somebody suggested douglas fir but I'm not familiar with it and don't know if it is available in our HD or Lowe's store and how expensive it is. The idea would be pressure treated wood, but it will be so heavy but at least will hold up under the elements. If I did it out of pressure treated wood, and wanted to paint it white or a color, would I need to prime it first or put a sealer on before or afterwards, then a final coat of whatever color I choose?Helpful Reply
-
-
KMS Woodworks on Aug 29, 2013Cedar is available in 3/4" thick stock as well as 1 1/2" thick ( the nominal 2 x stock). I have only seen Pressure treated available in 2 x (PT plywood is an option). PT often is quite "wet" when new and needs to dry well before it is painted this can vary from 6 months to a year based on you climate. Ideally the inside should have a metal liner.Helpful Reply
-
-
Betty819 on Aug 29, 2013I know what you mean about being "wet" as we have run into that when building our screened in porch/deck back in 1995.Helpful Reply
-
Related Discussions
How do I update those old brown slidings doors to the closets?
Update these old shabby ugly sliding closet doors?
How do I remove hard water deposits from stainless washing machine tub
My new home's washing machine appears to have a rough buildup near the top of the stainless tub. I have run Affresh through the unit but this remains. I don't want to... See more
How do we remove calcium deposits on our patio water fountain
How do we remove calcium deposits from our patio fountain and brick walkway?
How to makeover an ugly metal entrance door?
My entrance door is metal with a small openable window, how to update or make it look nice?
How do I update my ugly mobile home closet doors?
They are completely function
Would you rather wash and fold laundry or clean the dishes?
Given the choice, would you prefer washing the dishes or doing laundry? Share your preferences and insights!
How can I remove a magnetic door knocker from a metal door?
The magnet in the knocker has "welded" to the door and seems impossible to remove. I have to paint the door so if the paint is damaged its not a problem.