Want to build a flower box for my patio; where would I find plans on t
-
KMS Woodworks on Aug 28, 2013Building a box is pretty simple...so detailed plans are not really needed. More importantly are the material choices used to build it. Soggy dirt is very heavy and if thinner stock is used it can bow out and self destruct in a few years time. Wet soil against wood is also a quick road to failure do to rot. Lining the box with metal will help a lot in the rot dept. A flower box 5 feet long and 16" deep and 18" wide is HUGE and would weigh in at hundreds of pounds when filled with dirt. Remember that a 40 pound of potting soil is only .5 cu feet. Your dimensions would require at least 10 to 15 bags. This is 400 to 600 pounds worth. Once filled it will be near impossible to move about. Some folks will fill the lower parts of a big box with sytrofaom packing peanuts, then layer some landscape fabric over this. This greatly cuts down on the weight and soil needed. It is important though to use the old style "Styrofoam" not the newer "green" versions made from corn starch ( these dissolve in water).Helpful Reply
-
-
Betty819 on Aug 28, 2013I have a picture of what I want it to look like which came from a magazine that has the Initials as FC and date and I assume it is from Family Circle magazine about 5- 10 years ago. Only the picture and I know most outdoor flowerboxes are usually made of cecar but know that wood is very expensive. Somebody suggested douglas fir but I'm not familiar with it and don't know if it is available in our HD or Lowe's store and how expensive it is. The idea would be pressure treated wood, but it will be so heavy but at least will hold up under the elements. If I did it out of pressure treated wood, and wanted to paint it white or a color, would I need to prime it first or put a sealer on before or afterwards, then a final coat of whatever color I choose?Helpful Reply
-
-
KMS Woodworks on Aug 29, 2013Cedar is available in 3/4" thick stock as well as 1 1/2" thick ( the nominal 2 x stock). I have only seen Pressure treated available in 2 x (PT plywood is an option). PT often is quite "wet" when new and needs to dry well before it is painted this can vary from 6 months to a year based on you climate. Ideally the inside should have a metal liner.Helpful Reply
-
-
Betty819 on Aug 29, 2013I know what you mean about being "wet" as we have run into that when building our screened in porch/deck back in 1995.Helpful Reply
-
Related Discussions
Best way to make your driveway look like stone with paint?
Several years ago there was a DIY video on how to do this but can't fine it.
Are gray walls here to stay or are they on their way out?
Hey everyone,Gray wall color has long been a favorite choice due to its versatility, modern appeal, and ability to complement a wide range of design styles.But the qu... See more
Which mattress firmness do you prefer: soft or hard?
Finding the perfect mattress can be a game-changer for your sleep quality and overall health.So, we're curious: When it comes to mattress firmness, what’s your pref... See more
Toilet: Rumbling / Vibrating Noise when FILLING up (SMOOTH when flush)
When flushing the toilet, no problem, smooth flush like all others, no issues. (My 1st inclination of the noise when filling up was a clogged toilet, but it flushes q... See more
Clean grout hard (iron) water stains?
We have a shower that has laminate side and flooring. The areas were grout is has turned orange/Black. I have used vinegar applied with toothbrush, Granite Gold grout... See more
How do I remove super glue from a rubber floor mat?
I spilled glue on my rubber floor mat and have tried alcohol, soap, goop and some other things, but nothing took it all away.
How to remove cigarette smoke smell from my sewing machine?
I just bought a used sewing machine. Brought it home and wiped it down with Clorox wipes and they were dirty. Now the machine reaks of cigarette smoke. I tried vinega... See more