Any ideas on removing Vinyl Composite Adhesive safely?
-
KMS Woodworks on Sep 23, 2013so this is install over a wood sub floor? Mechanical means are chemical free...ie scrapping or sanding. If you go the sanding route a belt sander would be my first choice...just wear a good dust mask.Helpful Reply
-
-
Dee Fitzpatrick on Sep 23, 2013Thank you for the suggestions but this doesn't answer my question because its not practical for our situation and we would have to continue to change the sanding paper belt.Helpful Reply
-
-
Sherrie on Sep 23, 2013It was hopefully put down with contact adhesive so use a iron or blow dryer to warm it up and it should unstick, you might get a few pices that will need to be scraped off but when you warm it up it releases the glue on both sides. I have used a blow dryer on the highest setting.Helpful Reply
-
-
Dee Fitzpatrick on Sep 23, 2013Thank you I think I will use the blow dryer..Helpful Reply
-
-
Kat Tellez on Sep 24, 2013A blow dryer may not generate enough heat to melt the adhesive. You can pick up a heat gun for about $10 at Harbor Freight and that will work much better.Helpful Reply
-
Related Discussions
Any ideas on removing urine stains from vinyl flooring?
Cleaning mineral deposits off of glass
How do I remove mineral deposits from windows??? I've tried cleaning with vinegar on both the inside & outside of the windows...is it possible it's on the inside of t... See more
What to hang over fireplace?
Right now I have a cream colored berry wreath over my fireplace. I will be getting the picture shown over my sofa ( that is a mock up so size won't be exact). Do you... See more
Clean grout hard (iron) water stains?
We have a shower that has laminate side and flooring. The areas were grout is has turned orange/Black. I have used vinegar applied with toothbrush, Granite Gold grout... See more
Toilet: Rumbling / Vibrating Noise when FILLING up (SMOOTH when flush)
When flushing the toilet, no problem, smooth flush like all others, no issues. (My 1st inclination of the noise when filling up was a clogged toilet, but it flushes q... See more
How clean grout from a brick ?
hello all, I just moved to my new APT and I was working on my new kitchen. part of the work is to glue the bricks on the wall 1 centimeter apart so that the grout ... See more
I need a fabric stiffener that is weather resistant. Any ideas?
I created a fabric wreath and have tried two different brands of fabric stiffeners that have failed, any help appreciated.