Lifted veneer on old dresser
-
KMS Woodworks on Oct 02, 2013Many veneer repair can be done by lifting the damaged area and forcing some wood glue into the space. Often a thin putty knife or xacto blade can be used to lift up the wood. After the glue is applied some painters tape and weight can be used to hold it down while the glue dries. squeeze out can then be lightly sanded after its fully dry.Helpful Reply
-
-
Sheila on Oct 05, 2013The veneer is buckled in one spot so I won't have to lift it to get the glue in. I think I should have some clamps in the garage to help hold it together until it dries. Thanks for your help!Helpful Reply
-
Related Discussions
When did veneer come into play with furniture? I have an old dresser that is supposedly from the late 1800's and it has
veneer.
My toilet handle stays down when you flush and the water keeps running
how do I fix my running toilet?
Fruit flies in my office- Do I need to find the source?
My office has a ton of fruit flies. I'm not sure where they are coming from and how to get rid of the fruit flies. The garbage cans are all clean. We have some new pl... See more
What causes the top hem of a sheet to crease after washing and drying?
Every sheet set I have gets creases in the top hem of the top sheet. No amount of ironing takes out the wrinkles. Is there a solution? (Not sure this is a DIY ques... See more
How to get rid of fruit flies without using vinegar?
Indoor compost bin keeps attracting Fruit Flies- what can I do?
I have a small bin in my kitchen with holes in it that has a biodegradable /disposable liner. I put my fruit and vegetable scraps in it when I am cooking. The only pr... See more
I have fruit nats, in my kitchen and bathroom, they seem to go to wate
they seem to go toward water, but I can't figure how to get rid of fruit flies, even when I get rid of standing water.