Lifted veneer on old dresser
-
KMS Woodworks on Oct 02, 2013Many veneer repair can be done by lifting the damaged area and forcing some wood glue into the space. Often a thin putty knife or xacto blade can be used to lift up the wood. After the glue is applied some painters tape and weight can be used to hold it down while the glue dries. squeeze out can then be lightly sanded after its fully dry.Helpful Reply
-
-
Sheila on Oct 05, 2013The veneer is buckled in one spot so I won't have to lift it to get the glue in. I think I should have some clamps in the garage to help hold it together until it dries. Thanks for your help!Helpful Reply
-
Related Discussions
When did veneer come into play with furniture? I have an old dresser that is supposedly from the late 1800's and it has
veneer.
Hardwood Floors or Carpet in Bedroom: What's Your Preference?
Hey Hometalkers! We've got a cozy debate going on here: when it comes to bedroom flooring, do you lean towards the warmth of carpet or the timeless elegance of hardwo... See more
How to remove rust from exterior door hinges without removing them?
If I remove my vynal shutters to paint can I reinstall them using the
Same nails/ screws holes won't be inlarged
How to remove paint from hinges
how to remove paint from hinges on cabinets doors still attached . want to paint kitchen but so much painted over hinges , screws won't budge.will i need to cut aroun... See more