DIY Personalized Elevated Pet Feeder
by
Pinspired to DIY
(IC: blogger)
3 Materials
We recently added a new furry addition to our family, a 7 month old border collie named Hannah! We purchased her from a very nice family who didn't quite know what they were getting into when they purchased a Border Collie! She has A LOT of energy and is very stubborn (but luckily she's also very sweet and cute!). We are working on the stubborn thing, but in the meantime I wanted to build her a personalized elevated dog feeder (she is currently using an ugly plastic one that belonged to our previous dog, a Golden who died back in July). So, I decided to make her a new, fancy feeder!
First, here's a picture of our new mischievous girl (she's pretty cute, right!) :-):
Here are abbreviated instructions for building the feeder. For full details and cut sizes, please visit my blog at the link below.
I used my jig saw to cut out the holes in the wood (first use a large drill bit to drill a hole inside each circle, this will allow your jig was blade to fit through).
Next cut the 2x2 boards to length for the legs, and attach to each of the corners of the 1x12 board using wood glue and pocket hole screws.
Now, time to cut the 1×2 boards! It’s so fun when your project begins resembling it’s intended use! (Well, maybe that’s just me, but hey it’s the little things in life that make me happy!)
Next, attach the third 1×2 board to the top back of the feeder using wood glue and pocket hole screws.
Time to cut the bead board. Cut the front and side beadboard pieces and attach to the back of the front 1×2 boards using wood glue and finish nails. Repeat this process and attach the smaller pieces of beadboard to the back of the side 1×2 boards.
Okay, last cut! Cut a 1×4 board to length. Attach the 1×4 board 5 5/8″ below the top 1×2 board on the back of the feeder using wood glue and pocket hole screws.
Next, sand and paint the feeder with your color of choice, I used gloss white.
I purchased small MDF letters at Hobby Lobby and painted those gloss black. I attached to the beadboard on the front of the feeder using wood glue.
I then added the bowls and placed the feeder in its designated spot!
Enjoyed the project?
Suggested materials:
- Wood boards (Home Depot)
- Stainless steel pet bowls (Pet store)
- Mdf letters (Craft store)
Want more details about this and other DIY projects? Check out my blog post!
Published October 27th, 2016 2:41 AM
Comments
Join the conversation
3 of 8 comments
Frequently asked questions
Have a question about this project?
what type of paint do you se since it has to be safe for pets. My dog licks the side of the feeder and bowl