Can I refinish a veneer top table?
Related Discussions
Should I paint or stain my oak kitchen cabinets?
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
How do I paint my front door? It's metal.
How to paint grout?
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
What is the best method to whitewash bricks surrounding a fireplace?
How to redo a glass table top?
It's just a piece of glass on a bamboo table. I'm tired of cleaning the glass.
Any ideas how to refinish or coverup this table top?
I found this table and four chairs at Goodwill for 40.00- the chairs were easy to spraypaint, but the table top has "blisters" from the underlying particle board. Any... See more
http://homeguides.sfgate.com/refinish-veneer-table-72063.html
You can refinish a veneer table but it is a labor of love. In most instances, you will end up having to strip the veneer off. You want to just use some restore-a-finish. It can be bought at Home Depot in the paint section.
You can use furniture stripper on veneer & if the veneer is chipped, just use a wood filler, sand it, stain it & clear coat it. If the veneer is lifting, it will have to be glued down before sanding & finishing.
I have lightly sanded and restained veneer before. Be very very careful not to sand through the veneer. It is usually a very thin piece.
I salvaged a beautiful pottery barn dresser from the curbside. I overly sanded the drawer and ended up chalk painting the entire piece black and gray. The veneer was so beautiful - like a prism effect on the drawers. I was very disappointed. But after it was painted and new hardware, it looked like a million bucks. Don't sweat it. It was a gift to my daughter when she moved out to a condo.
Yes, we've done it. Just use a very fine sandpaper and go slow. You can't do it repeatedly, but once should be fine. Good luck!
This would be a lot of work is it worth it? Why not make a cap or hat or sorts that would fit over the top?