DIY Folding Display for Craft Shows and Markets
by
Paula Skulina
(IC: blogger)
I participated in two vintage markets in 2016 and needed a place where I could hang things for buyers to see. I wanted something portable, inexpensive, and something that would let me hang something in multiple spots. A trip to Lowe's lumber department gave me an idea, I made a portable display using a privacy fence section.
The wall folding in half and has removable pieces on the ends that allow it to be free standing. I can pound small nails into the boards to hang things and when the show is over, the nails are easily removed.
One fence section is a great size for a display but it is too big to store or transport. We had a worker at Lowe's cut the fence section in half. We then strapped the two sections to our Explorer and headed home to make the folding display.
The two fence pieces were lined up and screwed together using 3 (4") galvanized hinges. Now the fence will fold for easy storage and for transport.
We wanted the fence to be free standing, so we devised braces to use on the sides of the fence. We cut two triangles from scrap 1/2” plywood, and utilized scrap 2×4’s to hold the fence vertically. The triangle’s base measures 34” and its height measures 17”. The bottom 2×4 piece is 7” and the top on 5 3/4”. Click on over to my blog post to see exactly how we made the braces. The link is at the bottom of this post.
Here's a side view of the display. I've only used this for outdoor shows and for safety's sake, tied the display to a tree to make sure the wind didn't blow it over. If used indoors against a wall, the display wouldn't need extra support.
Enjoyed the project?
Want more details about this and other DIY projects? Check out my blog post!
Published January 2nd, 2017 8:01 AM
Comments
Join the conversation
2 of 82 comments
-
Deb55097247 on Sep 05, 2022
Another Amazing idea on Hometalk. Thanks for sharing this simple great look for selling your crafts!
-
-
Frequently asked questions
Have a question about this project?
How big is each piece?
Do you think this set up would hold item that weight about 8 to 10 pounds? I make mirrors with driftwood attached and have trouble displaying them at shows. They take up a lot of room set up on a mini easel on a table.
Can this concept be used with peg board too or would the peg board be too flimsy ?