How to clean a diamond ring properly? Thanks!
Related Discussions
How to clean a mirror without streaks?
Every time I clean my mirrors, they end up having tons of streaks and almost look worse than before I started. What could I use to clean them that won't leave streaks... See more
How to clean burns on stainless steel pans?
Help! I burned my pan. How do I clean stainless steel cookware that's been burned?
How to clean shower doors
How to clean glass shower doors
How to clean hardwood floors in the kitchen?
What is the best way to clean hardwood floors in the kitchen?
How to clean my kitchen cabinets from grease?
My kitchen cabinets are embarrassingly greasy. Please share your degreasing tips with me so I don't have to cringe every time I glance at my cabinets.
What is the best way to clean a burnt pot?
I made a thick soup for winter and by accident left it on the fire for too long. Now my soup pot is basically ruined! Any hacks to help me clean the burnt pot? Need t... See more
What would cause rooms to smell like cat urine, when there are no cats in the house?
The crawl space has been checked for plumbing problems and critter invasion and has been cleared, as have the attic spaces. The odor started after the crawl space wa... See more
White toothpaste(not gel) and a toothbrush
This is how I clean mine for routine cleanings
And, on the occasion that I forget to take my ring off when I'm making dough, I immediately take it off and soak it in warm water and dish detergent for about 20 minutes and then very gently use a clean toothbrush to push out any dough remnants left in between the prongs. Good luck!!
From the Gemological Insititute of America www.gia.edu
A simple plan to keep your diamond jewelry looking beautiful is to soak it in a gentle degreasing solution, such as water with a few drops of mild dish soap, once or twice a week. After you remove the diamond from the cleaning solution, use a soft, clean toothbrush to remove any remaining dirt. The toothbrush should be new and reserved exclusively for cleaning your jewelry. Use it to clean hard-to-reach places like the back of the diamond, which tends to collect the most oil and dirt.
they also make the following disclaimer:
"Household cleansers or toothpaste should never be used when cleaning diamond jewelry. Chemicals like chlorine can damage some of the metals used to alloy gold for diamond settings and abrasives can scratch gold and other metals".
From the Gemological Institute of America
A simple plan to keep your diamond jewelry looking beautiful is to soak it in a gentle degreasing solution, such as water with a few drops of mild dish soap, once or twice a week. After you remove the diamond from the cleaning solution, use a soft, clean toothbrush to remove any remaining dirt. The toothbrush should be new and reserved exclusively for cleaning your jewelry. Use it to clean hard-to-reach places like the back of the diamond, which tends to collect the most oil and dirt.
they also make the following disclaimer:
"Household cleansers or toothpaste should never be used when cleaning diamond jewelry. Chemicals like chlorine can damage some of the metals used to alloy gold for diamond settings and abrasives can scratch gold and other metals".
To add to my first comment this will explain how to clean the ring and toothpaste is meant for the stone. www.how.com/how_4924613_clean-diamond-rings-toothpaste.html
I sell a TON of jewelry on Ebay. Silver, gold, necklaces, gems, diamonds. I use white toothpaste (not gel) and a damp tooth brush. Chemical cleaners tend to remove some of the metal and some can damage gems. I also use it on copper and brass figurines. I've used it cleaning the rubber on sneakers I sell.
I was told not to use toothpaste on any part of my ring, or it would void the warranty. They said it would scratch the stone, due to its abrasive qualities. Be very careful, I once used my eyeglass cleaner thinking it would be safe, and it dulled the white gold finish. I had to get it professional cleaned and buffed. I use a baby toothbrush (super soft) and warm soapy water, as per my jeweller's recommendations. I also bring it for a free cleaning once in a while to a local jeweller (not the place where the ring was purchased--too far away).
I have not had any problems with tooth paste. Tried everything else. Did not work that good. Toothpaste has fine marble powder in it. Works for teeth, and they aren't as strong as diamonds or gems. Also one product for many uses......
http://www.ehow.com/how_4924613_clean-diamond-rings-toothpaste.html
It's not the diamonds and other stones, it's the metal parts that are susceptible to dulling with abrasives. Opals, pearls, amber, and coral are very susceptible to damage-- take those to the jeweler.
Windex and an old toothbrush. Then rinse well.
Make sure that your jewelry will not be harmed by Windex. Windex is safe for gold and silver jewelry. It can also be used on diamonds and hard gemstones. However, do not use it on emeralds, coral, opals, pearls, amber or turquoise.
Cloudy ammonia..... awesome. Diamonds come out like BRAND NEW. Use only on gold jewellery (Have used on silver - no problem - but some silver needed an extra polish with silver polish - diamond/stone did not tarnish) But a Jeweler told me that's what she uses to clean jewellery in her store. Soak for a couple of hours and with a soft toothbrush brush gently the entire setting - back and front - top and bottom. Rinse and dry. Would not use on opals of course, but have used it on my emeralds. After 20 years they still come up perfect every time. Of course as with anything of value - use this at your own discretion / risk
Our jeweler recommended soaking in Mr. Clean. Everything comes out sparkling. That's for gold and diamonds. I would not think you would want to use it for other gem stones.
I am going to have to keep checking in on this discussion to see what wins toothpaste or an other method!! Tee Hee!!! 😀😀😀
Now I am confused. My jeweler has used window cleaner and my jewelry comes out sparkling. Also, if you get a ring stuck on your finger, spray a little window cleaner on your finger and the ring will slide off. I too want to know more about using white, non gel toothpaste. ???
I soak mine in sudsy ammonia for a half hour, then rinse well and air-dry. PERFECT...and no scrubbing.
During a jewelry class in college we used ammonia.
Here's another vote for toothpaste! And make sure it's paste, not gel.
Dow Bathroom Cleaner (the one with the foaming bubbles) works great. Or any other brand of spray bath cleaner that produces a white foam. I spray it on, let is sit about 30 seconds, then toothbrush all the crevices and surfaces. I also use toothpaste and a toothbrush as well. I would say both come out equally good.
Take an old tooth brush and put Dawn soap on it, it just takes a minute and what a beautiful shine!!
Go to walmart to the jewelry department, pick up a red jar of jewelry cleaner. You soak your jewelry in the solution for just a few minutes, you can take the little brush that comes with the solution,for cleaning your rings and than rinse under warm water. They come out looking brand new. It only costs $3.97 and i bought mine about 10 years ago and still using the same jar. Great stuff!
Toothpaste! Not gel,use an old toothbrush and very hot water, snap/shake ring to get water out of all the crevasses