There are cracks in my ceramic tiles, what can I do?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Can I apply new ceramic tile over existing ceramic tile on backsplash
Does anyone know how to tile over tile or if it is even possible? I have a ceramic tile backsplash and would like to apply a new ceramic tile over that, the old tile ... See more
Replacing tile, I can't find tile to match, what can I do?
I took a wall out between my kitchen and "formal Dinning room". There was no tile where the wall was. Now I cannot find tile to match what is there. It is only 6 to 8... See more
You can fix them, check out this really helpful tutorial! http://www.hometalk.com/diy/floors-ceilings/got-chipped-floor-tile-try-this-fix--16230111?expand_all_questions=1
Remove broken ones clean the area super clean and substitute smart tiles cut to fit. Breaks up the expanse of tile. If it is on the floor, your sub floor is moving. That is why the cracks. Myself, I'd get a tile guy if it is walls. You have a problem.
Flooring is easy. Takes a little time to chisel out the bad ones, clean up and retile.
The cost varies by style. Look around, Lowe's, Home Depot, Menard's or on line.
How to Repair Holes or Cracks in Ceramic Tile ..... Patching unwanted holes in glazed tile like this can be a tricky proposition. Here's a solution that may not always be perfect, but will make a big improvement. Polyester resin or auto body filler, often used to repair car bodies. Mix up a small batch by adding some hardener and stirring it thoroughly. Using a putty knife, press the resin into the hole slightly overfilling it. Then just as the material begins to harden while it's somewhat rubbery, trim off the excess with a razor blade...... Next use 600 grit sandpaper to sand the filler smooth. Wetting the paper with water makes it work best. Now it's time to try and match the color of the tile. A porcelain touch up kit which is available at most home improvement centers comes with several different colors of paint. You can also use artists acrylic paints available from Michaels, Hobby Lobby, art supply stores, and online...... The trick here is to mix these different colors together until we come up with one that matches the tile. Apply the paint with a small brush. You can test it on a nearby tile. When you get it the way you want it, then just paint over the patch and let that dry. Give it one final sanding with that very fine sandpaper and you'll have, well, maybe not a perfect match, but something that's a heck of a lot better than what you started with.
Thank you for you help!
I use enamel craft paint Folk Art brand it has an E on the top of the bottle in the cracks the same color of the tile.