Help! How can we heat our master bathroom?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
What can I do about wood smoke coming into my house?
I need help. My back door neighbor heats with a wood stove all winter. They are downhill from me. Almost all their smoke makes its way into my house, causing headache... See more
A/C question: My outside unit runs, but no air is being pushed through the vents in the house.
It has been about a year since my last tune up, and I am wondering if a tuneup might be all I need, in order to avoid a service call and diagnostic fee and any other ... See more
Do you have any heat going into the room? What kind of heat do you have? Is there a blockage, did something get disconnected, or are vents closed? An electric in wall heater is nothing more than a portable heater designed to be mounted in the wall. They do have a higher wattage heat output and are thermostatically controlled. Some are 120V and some are 220V. They do tend to be quite expensive but serve the purpose. Throw rugs on the floor would help dampen the cold floor. Too bad you don't have under floor heat. When you do plan to frame the wall, use foam polystyrene board for insulation. Higher R rating insulating than fiberglass. Less chance for mold and mildew growth. Seal any joints with spray foam.
I had tenants who complained that their bathroom was a little chilly in the Winter, ( brick house and bathroom abuts exterior, also) so I installed a ceiling fixture which contains 2 heat bulbs. Installed, it fits almost flush. It is necessary to run a new wiring circuit to complete the installation, to eliminate the possibility of current overload. I did the work myself, and with all the new parts, it was probably less than $50. I now live in the apt. myself; and whenever I want a little extra warmth, I just flip the switch. Those 2 heat bulbs do make a difference !
You can buy kits from Menards (and probably other places) which allow you to spray foam insulation into your walls. All you would need to do is bore a few holes in your interior walls, and spray the foam insulation in, and then patch the walls......would save you having to tear out your walls, and all the mess.
You could use throw rugs on your floor.............just make sure they have a rubberized coating on the back to prevent slipping. Good Luck......
How about a heat fan to warm you up. https://www.walmart.com/ip/Sunbeam-2-In-1-Tilt-Heat-Personal-Heater-Fan/29385924
I don't know how the set up is inside the bathroom, however, I would take one wall at a time, remove the sheetrock, insulate, and recover. I found that my upstairs shower was installed before insulation was installed. I removed the sheetrock, pushed insulation down between the studs and re-sheetrocked. I live in an old restored farmhouse, so I keep one the oil filled heaters that look like old radiators in the bathroom and keep the doors closed. One of the best things I did was to put a radiant infloor heating system mat down before I put tile down. I then insulated from below. The floor is always warm. It uses very little electricity and is thermistatically controlled. The company's name is Warmly Yours.
Another thing that can help is insulating in between the floor joist in the crawl space if there is none. Also insulating the ductwork would keep the heat from radiating.
Thanks, i did not know that there was "do-it-yourself " spray in foam
Assuming the marble floor is solidly down, maybe a tile contractor could put down heat mats on top of it and cover them with another layer of tile. Less mess than ripping everything out and starting over. Some foam board and a layer of drywall over the brick would help, too, unless making the wall effectively thicker isn't an option.
I do not recommend the spray foam kits for the DIY! They need to be properly installed and not in sealed cavities. You can't just drill holes and pump the chemicals in the walls. The expansion process produces off gassing. Even the packaging states "for professional use"..... A lot of horror stories...... https://www.youtube.com/watch?v=0Hh5MYv7lWc
Cathedral Ceilings need a remote controlled Ceiling fan! Heat rises! Or you can put in a flat false ceiling with plenty of light weight insulation on top of the panels. They may even make insulated false ceiling panels. I know the cathedral ceilings are beautiful, but you're freezing your rumps off!
we have one, and use it, but not that helpful.. along with the wall insulatio, we are probably going to drop the ceiling as you suggest. You are right, it is light and airy, but not worth the cold bums 😉Thank you
your portable heater may not be big enough for the size of bathroom. my breeze way has a heat duct, and cold air return- and it's about 10 to 15 drerees colder than the house. tried a smaller portable heater - it could not keep up. there is no insulation in the walls. the walls are covered in 1950's solid wood paneling. all windows shrink wrapped.
found a portable radiator at a local big box store. it's working like a charm. dries mittens nicely too. it gives off a nice even heat... unlike portable elerctric box heaters that cycle on and off.
another thought.....for our out door pets we used heat lamp bulbs- they fit a standared light socket. you might try one in an overhead fixture.
If you have any incandescent light bulbs, those will give off heat. Put in the biggest wattage your light fixture will safely hold (there should be a label on the socket to tell you) and keep the lights burning a while. This will supplement whatever other heater(s) you have in there.
I think a large electric radiator would be my choice as well, along with a thick rug on the marble tile floor.
Contact someone in the business that will give you a free estimate. You surely don't want more of a problem. That bathroom doesn't sound like it was permitted and up to code--just an educated guess. I would be concerned about frozen pipes in the winter time and water damage in Indiana. Best of luck to you!
Thanks for the suggestion... we are making sure the pipes are fine through all this.
I just read about this. ..a very crafty woman coiled up some of those Christmas lights in a tube made for indoor/outdoor USC approved and wove them on the underside of a rug. Over time they worked as a night light and threw out a surprising amt of heat..and if your feet are warm, so is your body.
ive been Using them Under my seedling trays for years as a heating mat.
Electric blankets, turn on before heading to bed to heat the sheets up