Antique Mason Jar Bath Accessories
by
Issaac @ Practicing ImPerfection
(IC: blogger)
5 Materials
Here's a super cheap and easy way to add some country charm to your bathroom! My total cost for this project was $10!
Be sure to check out my blog post for detailed instructions on this DIY
http://practicing-imperfection.com/antique-mason-jar-bath-accessories/
You'll need a Mason jar. Any type of Mason jar will do. I chose to use an antique perfect Mason jar. You'll also need a soap pump. I stole mine from a generic soap dispenser I found on clearance.
I started by marking the center of the lid with a marker. Next, I took a 1/2 inch drillbit and mallet and punched a small hole in the lid to get it started then attached the drillbit and drilled a hole.
Now that you have your hole drilled, use an adhesive to attach the soap pump. I used E6000. Allow the adhesive to dry overnight.
Fill your Mason jar with your favorite soap and add another jar or two to compliment your new soap dispenser.
Enjoyed the project?
Suggested materials:
- Mason Jar
- Soap Pump
- E6000 Adhesive
- Drill and Drillbit
- Mallet or Hammer
Want more details about this and other DIY projects? Check out my blog post!
Published February 24th, 2017 10:22 PM
Comments
Join the conversation
1 comment
Frequently asked questions
Have a question about this project?