New doors
-
Moxie on Jan 06, 2014As always when using a contractor..Pick one you know you can trust and don't pay them until you are done and happy with the job. I trust you will go an pick out the doors yourself, so you will know what they cost..all custom order doors can be ordered with custom hing locations to avoid any unsightly rework on the existing jambs (different door manufacturers have different standard hing locations and you don't want to have to replace jambs to or have old hing recesses exposed when they are done) - just a suggestion..but if you buy the doors you could just hire a painter to finish (if not pre-finished) them and ask them to reinstall them for you as well. Painters often have to remove and replace doors to refinish them. Most millwork shops that make true solid wood doors or door places (like pella and the like) can help you find the door you really want and know what questions to ask to get the right doors. I would also take a visual inventory as such of the existing damage, if any, on your walls and floors so you will know if they damage anything while working in your home. If you have dated pictures you can point it out to them and "suggest" they repair it. Hope some of this helps and enjoy your new doors!Helpful Reply
-
-
Window Universe on Jun 18, 2014Hi Karen, You should always purchase from a contractor whom is licensed, bonded, insured, and has a profile with the BBB. Be sure to check their ratings on Angie's List and HomeAdvisor as well.Helpful Reply
-
-
Christine on Jun 18, 2014Heck with all that, although it's good advice. See if you can use the lovely exterior doors from Lowe's or HD. They're 1 3/4" thick vs. 1 3/8" and the weight difference is enough to make them feel solid and strong. I used the 6-panel, unfinished exterior doors to use as 15 pocket doors. I think they're pine. If you have to buy a door with a frame, I'm no help. It sounds like your doors will be a lovely addition to your home.Helpful Reply
-
Related Discussions
I'm trying to hang a curtain rod over a sliding glass door, but keep hitting something that I can't drill through.
The house is built of cement blocks, but there is drywall on the walls. I had another house that was the same type, but never had a problem with hanging curtain rods.... See more
Can I use my hot glue gun to stick crystals to mirrors?
I have a set of round frameless mirrors and I would like to create a pattern across them with crystals, I'm just not sure which glue is best, thank you.
How can I darken the color of painted furniture using varnish?
Hi, I just paint my outdoor dining set, but the color is a little lighter than what I want. I am planning to apply varnish on them and I was thinking to take advantag... See more
Can a water based varnish be used on chalk paint?
Is it possible to use a water based clear varnish instead of the finishing wax on chalk painted furniture? I love the look of distressed chalk paint but I'd like a sa... See more
How do I hang curtain rods if I can't find wall studs?
I am looking for Thanksgiving Crafts, please share ideas?
I'm looking for Thanksgiving craft ideas, particularly the pumpkins made from toilet paper and fabric.I would love it if you could share some of your cute DIY project... See more