DIY Chinese String Lanterns
by
Nancy at Craft Your Happiness
(IC: blogger)
7 Materials
We've made these before using battery tea lights but this new updated version is much easier to make and easier to upkeep. They are also smaller! Use them for parties inside or hang along your back porch for ambient lighting that looks wonderful at day or night. SEE ALL PHOTOS HERE
Gather all your supplies. We used the small 7.5 size soda can for these.
Freeze all your cans with water overnight. Keep the tabs on them! (
Taking a hair band place it on the top of the can just below the bevel of the can.
Mark around with the dry erase marker. Repeat the same step around the bottom of the can. Be sure that the can is dry, as condensation may ruin your marker. (TIP: Feel free to do this step prior to freezing the can, to avoid damaged markers.)
Holding the can with the oven mitt, cut between the marked lines with the X-acto knife. The frozen water gives you a solid backing, ensuring straight, clean lines. Keep cuts about 1/2 inch apart. Complete this around the full circumference of the can.
Spray paint the cans your color of choice. Let dry. The colors we used are listed over on our site.
Once the cans are dry, simple press the top and bottom of the can together in order to get the bend. This may take a few tries to perfect. Some of the ribbons may bend inward, initially. Simply reach into the can and bend them back out. Aluminum is very forgiving.
Depending on the length of your light strand, insert 3-4 lights into the top of each can. Leave one light out in between each can if needed for spacing.
Use a twist-tie or white pipe cleaner to attach the wires to the pull tab of the soda cans, ensuring everything stays in place. We used green but suggest you use white to match the lights.
{
"id": "3815282",
"alt": "",
"title": "",
"video_link": "https://www.youtube.com/embed/ALnIBkHzysA",
"youtube_video_id": "ALnIBkHzysA"
}
{
"width": 634,
"height": 357,
"showRelated": true
}
Enjoyed the project?
Suggested materials:
- Soda Cans, 7.5 oz size
- String lights white cord, preferably LED
- Spray Paint of Choice (see our post for colors we used)
- Xacto Knife
- Dry Erase marker
- Hair band or rubber band
- White pipe cleaners or white twist ties
Want more details about this and other DIY projects? Check out my blog post!
Published April 12th, 2017 2:03 PM
Comments
Join the conversation
3 of 32 comments
-
Joyce Drake on Jun 19, 2017
GREAT IDEA! Kudos. Im going to make them.
-
Nancy at Craft Your Happiness on Jun 19, 2017Good luck Joyce!
-
-
-
Denise Fox on Jul 09, 2018
Can't wait to do this project. How ingenious.
-
Frequently asked questions
Have a question about this project?
Not a question ,only a comment. This is the most creative, most economical DIY craft/project I have seen in a long time! Good for you and creative minds like yours!
Kudos from me too, this is a great upcycle! I'm imagining a copper-painted set of these hanging in my deciduous trees- off to raid my workplace recycling bin next week!