What will cut tires?
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
Whats the best home dye cut machine to make freehand stencils?
I'm a graphic Designer/Decorator and I would like to experiment stenciling furniture using my own graphics.... I've been hearing a lot a bout Silhouette Cameo and Cr... See more
You can use a jigsaw with a blade for rubber!
the sidewalls, you can do with a hacksaw, but I have not found anything that works 'well' on modern tire treads - a jigsaw with a metal blade will work, but leave little wire bits sticking out of the ends that I consider dangerous (they will take your skin off as easily as a wire brush)
whatever you do, wear good work gloves. Most tires have steel in the treads and that can cut You. you will probably need a blade meant for steel on your jigsaw or sawzall.
You need a grinder like what a welder uses you can get one at any hardware store and put a cutting disc on it that you can buy there also this works very well
hack saw or sazall the end is the hard part with the steel rim go on inner side and cut that out then much easier to cut rubber