How do you get black mold off a roof?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How do you remove mold from bathroom textured ceiling?
How do I remove mold from window sashes and frames?
My renters just moved out and a walk-thru revealed mold on the window sills/sashes/frames. They had heavy, rubber lined, curtains on all the bedroom and living room ... See more
The black mold-like stains and streaks that appear on roofs, particularly light-colored asphalt shingles, is actually a blue-green algae (Gloeocapsa magma). Commonly found in climates with warm, humid summers, it does no damage to the roofing, but it certainly does looks bad.
The less expensive solution is to spray wash the roof with a 50 percent mix of water and bleach to get rid of the algae. (No pressure washers, please. They're likely to damage the shingles.) Just be sure to wet your foundation plantings first, and rinse everything in clean water when you're done. Plants don't like bleach, and wetting them with plain water first protects them. You can also cover them with tarps or plastic sheeting, which will protect the soil around your plants as well. Make sure that you create a wide radius around your home to be safe.
Allow the solution to soak into the shingles for at least 15 minutes. If they are severely molded, you may want to give it a little longer. Next, rinse the shingles thoroughly with a garden hose at low pressure. Start from the top shingle and rinse downward to prevent water seepage.
To keep the algae from coming back, insert 6-inch-wide strips of zinc or copper under the row of shingling closest to the roof peak, leaving an inch or two of the lower edge exposed to the weather. That way whenever it rains, some of the metal molecules will wash down the roof and kill any algae trying to regain a foothold on your shingles.
You can probably see this same principle working on roofs in your neighborhood. Look for chimneys with copper flashing; the areas directly below the flashing will be free of any algae stains.
The strips also work on roofs suffering from moss buildup. Just scrub it off first with a brush, then bleach as above.
there is a product called Wet-and-forget that is highly recommended and not Toxic and is supposed to do the work for you.
I have used Wet-and-Forget and it is easy to use. You need to mix it with water in a pump sprayer, and then just spray it on. (It also works on algae on siding and patios, decks, etc.)
Whatever you do, don't let anyone power wash your roof! It will damage the shingles. There are plenty of guys that will try to convince you to do that, but it will wreck your roof, blasting all the granules off the shingles.
Hey S&D. Any force of pressure will remove the protective grains on the shingles deteriorating them over time.