What is safe to use to remove latex paint from an old oak floor?

I would sand them if it were me. But it depends on how much flooring you have to do, and since you mentioned 2 additions, I am assuming the entire house needs to be done. Citristrip works well, but may get a bit expensive? Maybe some other Hometalkers will have a more enlightening response than mine. My guess is you are trying to save the original floors if possible, which I think is awesome.

Use Citristrip Paint remover.

If you are certain it's latex paint and not lead based, yes, you can most definitely sand them down to their original wood, then stain and seal or whatever you choose to do.

After research I have discovered I can use rubbing alcohol. It will remove the paint & not damage the wood. Sanding clogs the sand paper very quickly & becomes very expensive with the amount of flooring that needs paint removed.

Depending on how much you have to do, go with the Citristrip, it is a good non-toxic paint remover, if you think the paint is not lead based. If lead based, I would consult a professional and get estimates. You can get lead testing kits from Home Depot and Lowes. Rather be safe than sorry.

If you opt for a sander, get the one with the vacuum attached.

Hello, hope this helps. You'll need a damp microfiber cloth with a drop of dishwashing liquid on it

You can put a good amount of pressure into rubbing the paint splatter with this cloth. Sometimes, the moisture is enough to soften the paint. Softened paint can then be gently scraped with your plastic scraper or your fingernail.

I would rent a floor sander from lowes or have someone come in and sand the floors down.