How can I paint my cupboards?
![Kim 'Kiewatt' Waknitz](https://cdn-fastly.hometalk.com/media/profile/2015/01/28/2252167.jpg?size=91x91)
Related Discussions
Should I paint or stain my oak kitchen cabinets?
![Lauren of Mom Home Guide](https://cdn-fastly.hometalk.com/media/profile/2019/03/24/161201_3.jpg?size=50x50)
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ... See more
How to paint a metal front door?
![Ginny Wathen](https://cdn-fastly.hometalk.com/media/profile/2016/11/05/14292662_1.jpg?size=50x50)
How do I paint my front door? It's metal.
How to paint grout?
![Ann7680670](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-A-BC70FF.png?size=50x50)
How do I paint grout to change the color? The grout is in great shape, but the color - meh.
How to whitewash a brick fireplace?
![Chris jenne](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-C-FF8282.png?size=50x50)
What is the best method to whitewash bricks surrounding a fireplace?
What kind of paint can I use to paint my pegboard so it doesn't swell?
![Camille Fothergill Meadows](https://cdn-fastly.hometalk.com/media/profile/2017/04/04/22355875_1.jpg?size=50x50)
We just moved into a new home and I have a nice room to turn into my craft room. I am putting up a pegboard, but want it to look nice. I want to paint it And put a fr... See more
Can I paint vinyl mesh roller blinds? I had them in my sunroom
![Kathy D](https://cdn-fastly.hometalk.com/media/profile/2017/10/09/6313417_1.jpg?size=50x50)
So exciting to do a makeover! You can definitly leave the doors natural, just use a color that matches nicely- maybe a toupe, or natural- you can usually use chalk paint to paint over vinyl or you can sand it down to have a fresh start- good luck!
Try getting it warm with a hair dryer on low heat. It should peel right off. Then sand it lightly.
Auhhh, the great manufacturers cover up for particle/pressboard cabinets! Vinyl is what you are looking at, sanding it lightly will allow the paint to stick better; removing the vinyl will allow a different surface, but one must be careful. Particle board leaves dips & gaps in the surface that will show up; pressboard will absorb the liquid of the paint & swell up...leaving bumps & rough spots on the once smooth surface-sanding would be required to re-smooth it & apply additional coats of paint. Maybe your best bet would be to use the chalk paint method.