How do I fix chipped drywall corners without noticeable patches
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How do I fix chipped/damaged cabinet frame corner?
Hi! Posting again about my cabinet project. I’ve been inspecting my cabinets getting ready to paint them and I’ve noticed areas on the corners of the cabinet fram... See more
Water damage on bathroom ceiling
I am about to patch up this water damage on a low bathroom ceiling. What can i paint/seal the entire ceiling with to minimize future water damage? the ceiling is very... See more
I've used putty with pretty good success on the corners of our drywall. Sometimes it won't work of course, but I think it's worth a try!
I bought metal strips that are used for the edges and covered them with joint compond and it worked great!
Hi Iceqwn,
Chipped drywall corners where? Up at the crown mouldings or down near floor level, or part way up the wall? How bad are the chips? The best patching material is compound - drywall compound just mix it up as per the directions, or buy the premixed one. patch more than you need and sand it back smooth, any pin holes can be filled and sanded out after, put a couple of thin coats on in preference to one thick coat.
Metal external reinforcement corners are a good idea if you need them but there is a bit of work involved in fitting them.
Good luck