How can I fix slippery porcelain tile in my kitchen? Too many falls :(
![Josephine Puente](https://cdn-fastly.hometalk.com/media/profile/2016/10/07/12883429_1.jpg?size=91x91)
Related Discussions
How to get rid of mice?
![Jessica Hill](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/107358_1.jpg?size=50x50)
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
![Abby](https://cdn-fastly.hometalk.com/media/profile/2021/02/07/50639059_1.jpg?size=50x50)
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
![Sharon](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-S-59A1F4.png?size=50x50)
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
![Frisco's Cards](https://cdn-fastly.hometalk.com/media/profile/2017/01/27/18563525_1.jpg?size=50x50)
How do I fix squeaky hardwood floors?
Tile backsplash when there is existing countertop backsplash
![Kate Griffin | Eating in the Shower Blog](https://cdn-fastly.hometalk.com/media/profile/2021/08/22/163456_1.jpg?size=50x50)
We are thinking about how to add a backsplash to our kitchen. Unfortunately when we had our countertops installed we ordered a small backsplash that comes part way up... See more
Contractor mis-cut the floor when he put in the toilet
![Staci F](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-S-FF00A7.png?size=50x50)
Hello, Our contractor didn't "measure twice, cut once" when he put in our toilet. Check out the photo. I'd appreciate any suggestions on a fix or a way to hide this m... See more
If you can't afford to replace the flooring, I suggest good non skid rugs to coordinate with your decor.
SlipDoctors Stone Grip
This substance meets the federal Americans with Disabilities Act and the Occupational Safety and Health Administrations guidelines for floor safety. After cleaning and drying the tiles, you can apply the treatment according to the directions, and then rinse it off. This formula is clear, and it won’t alter the appearance of your floor.
Traction Kote 400
Traction Kote 400 is an epoxy-based formula that is available in spray cans or gallon drums. When using spray cans, simply spray the substance on the tiles. When using the gallon drums, use a roller designed for epoxy-based solutions. Once the formula has dried on the tiles, the floor should be non-slip. Traction Kote 400 is also suitable for outdoors, and it comes in a range of colors, including clear.
InvisaTread
Just like the products above, InvisaTread is another option that will make your glazed tiles less slippery. Although the product is not a “non-slip coating,” it helps make your surface feel less slippery, especially when wet. This product is invisible when dry, and it doesn’t leave a sticky feel.