What's the best way to strip an old finish from an old dresser?
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
What is the best way to remove old carpet glue from linoleum floors?
The carpet was an indoor/outdoor carpet. It has been in my grandparents’ home since the 80's and I need to remove it. My husband is severe COPD and using somethin... See more
find products at a hardware store
i would find a pro refinishing shop, and ask them to "dip strip it". they generally have big vats of furniture stripping solution. no scraping, no stinky fumes, no potentially caustic chemicals in your property. since the piece is stripped all areas at once- there should not be any color differences on the dipped piece.
depending on how old the piece is, you might have to go to a restoration hardware catalog to find hardware for it. as the years go by many manufactures have changed the hardware to different sizes from yesteryear's standards. i refer to it as planned "obsolescence". i went to put different pulls on my kitchen drawers. none of the new stuff matched the width of the previous holes. they are still catching my belt loops. the refinishing shop should have access to period or reproduction hardware. they should be able to date the piece- if it is a valuable or rare antique refinishing may devalue its monitory worth.
There are lots of products available for home stripping and the amount of work to do it will depend upon the overall condition of the piece and whether you want to get to bare wood. Once the finish is gone, go over the piece with a palm sander to smooth any imperfections. If you are looking to keep the colour similar to the existing you don't necessarily need to get to bare wood. Good luck