Ideas on how to redo lacquer electric fireplace?
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
Marble fireplace mantel . . .how to repurpose?
We replaced our old marble mantel & now I would like to repurpose it. The piece measures 8" x 1 1/4" x 6'. Any suggestions would be greatly appreciated.
Need update ideas for Bedford stone fireplace
Just bought this house. It's got great bones but needs updates everywhere. That means the budget is tight. I need ideas to update this fireplace. It is boring and... See more
https://www.google.com/amp/s/www.kylieminteriors.ca/how-to-update-your-fireplace-5-easy-ideas/amp/
Red enamel will give an almost identical look of lacque. i did it on a cabinet and it looks beautifu. Lightly sand the fireplace, then using a tack cloth (of damp rag), wipe it down. Using painters tape tape off all areas you don't want painted. Prime the fireplace with light gray tonite latex primer (the paint store will tint it for you). Apply one even coat of primer, let dry. Apply red enamel paint, it could take up to three coats depending on the look you want. Let dry thoroughly between coats. Apply coat of gloss polyurethane, using about 80 grit sandpaper lightly sand after dry. Apply 2nd coat of polyurethane, lightly sand with 100-120 grit sandpaper when dry. You may want to apply 3rd coat of polyurethane and do a final sand using 160 grit sandpaper, again its dependent on the look you want and your patience level!
You would have to use high heat paint, try this in red, mask off the area real good to prevent over spray. https://www.walmart.com/ip/Rust-Oleum-High-Heat-Flat-Blue/46891764?wmlspartner=wlpa&adid=22222222227034785259&wl0=&wl1=g&wl2=c&wl3=67022548129&wl4=aud-310687322322:pla-150228158449&wl5=9033057&wl6=&wl7=&wl8=&wl9=pla_with_promotion&wl10=8175035&wl11=online&wl12=46891764&wl13=&veh=sem