Make sure the power is off to the outlet, unscrew the cover and the outlet. match up the wires and cap them, and screw the outlet and outlet cover back in place. Its pretty simple, just be 100% sure the power is off to that outlet.
First you must go to the circuit box and shut off the circuit to that outlet. Use a circuit tester to be sure there is no current. Remove the cover and the screws holding it in place. Undo the three wires on the device. I take pictures first with my phone. Then simply reconnect the wires exactly as they were on the original. Scree the plate on. Turn the power back on. You should be back in business. It's a simple dobit yourself but use caution with electricity and yes you might watch a utube video first. Good luck
It seems to me that outlets were probably made with two places to plug something in for a reason, but I know zilch about this kind of thing. I've just moved my comput...
See more
The one electrical outlet in my house feels warm. I was wondering if it is because I am doing something wrong or if there could be a serious electrical issue. Any adv...
See more
Make sure the power is off to the outlet, unscrew the cover and the outlet. match up the wires and cap them, and screw the outlet and outlet cover back in place. Its pretty simple, just be 100% sure the power is off to that outlet.
google it....good advice there on anything...
Here's a link to an article that should help:
http://www.dummies.com/home-garden/home-improvement/electrical-wiring/how-to-replace-an-electrical-outlet/
BUT if you're unfamiliar with how electric connections work or inexperienced with replacing outlets, it would be much SAFER to call an electrician.
Good luck!
Here are a couple links for you! Be safe.
http://www.dummies.com/home-garden/home-improvement/electrical-wiring/how-to-replace-an-electrical-outlet/
http://www.diynetwork.com/how-to/skills-and-know-how/electrical-and-wiring/replacing-outlets
For safety sake, call a licensed electrician.
First you must go to the circuit box and shut off the circuit to that outlet. Use a circuit tester to be sure there is no current. Remove the cover and the screws holding it in place. Undo the three wires on the device. I take pictures first with my phone. Then simply reconnect the wires exactly as they were on the original. Scree the plate on. Turn the power back on. You should be back in business. It's a simple dobit yourself but use caution with electricity and yes you might watch a utube video first. Good luck