DIY Custom Picture Frame
![Linda Crandall](https://cdn-fastly.hometalk.com/media/profile/2017/03/20/196880_1.jpg?size=91x91)
by
Linda Crandall
(IC: blogger)
1.5 Hours
Easy
DIY Picture Frame
Hi everyone! Today weare going to show you how to make DIY picture frame from your old scrapwood. This is a pretty easy project. It cost us nothing to make since we had all the scraps in our garage wood storage box (our scraps always become a DIY something ;-) ).
A DIY picture frame is fun, but even better with they can be made with left over craft or wood scraps you just can’t toss away. We used all the left over scrap we had from framing our bathroom mirror post, wood left from a cabinet build, and tile left over from our tile project in the master bathroom. You can pretty much use any thing to make a good DIY picture frame, so don’t be afraid to be creative.
Here’s what we did to create our DIY picture frame:
First, I cut the frame pieces to my desired length on 45 degree angels to start my DIY Picture Frame.
Then we glued the 45 degree angels together and added as mall brad nail using our Ryobi nail gun to form our DIY picture frame.
Once done, we trimmed down a small piece of wood for the center of the DIY picture frame and installed by using our Kreg jig to make 4 Kreg pocket holes, our Ridge power driver, and 4 pan head screws. We secured the flat board to the sides of the frame.
After we were done we painted the board the color of our choice, we used Annie Sloan Chalk paint in French Linen.
Once we painted the board we added our left over tile around the edge of the frame. The pieces left over were perfect and we slid them into place like a puzzle making sure we did not have to cut any of the tile.
On the side of the DIY picture frame, we used wood icing product and a stencil to get our raised decor on the frame. We simple spread the wood icing product on like peanut butter, and let it sit a couple minutes, then lifted the stencil to get our effect.
When the stencil dried, we painted the center ring of the DIY picture frame with our AS Chalk paint in French Linen to match our center board, following the rest of the frame in an old white color.
We added a white cloths pin clip purchased from Joann’s Crafts into the center of the board with our glue for our picture to hang in the center, and hung on the wall to share with our family and guests. We used a cloths pin because we like to change out our photos as they arrive from family.
This really was an easy project to create your own DIY picture frame. If you do not have a saw to cut the 45 degree angles, you can use a compound miter box and hand saw, or have a handy neighbor cut the angels for you. Once done, stand back and enjoy your DIY picture frame handy work!
We hope you enjoyed our post on making a DIY picture frame today. We love that you stopped by to read our post. Stay warm and safe outthere if you live in a bad weather area. If you are in the sun, absorb a little for me – Vitamin D is starting to become a food group here in Missouri and I can use all I can get! ;-)
Please stop by the blog - check out our advertisers, and leave us a message - we would love to hear from you all :-) Until tomorrow’s post!
Linda :-)
Hi everyone! Today weare going to show you how to make DIY picture frame from your old scrapwood. This is a pretty easy project. It cost us nothing to make since we had all the scraps in our garage wood storage box (our scraps always become a DIY something ;-) ).
A DIY picture frame is fun, but even better with they can be made with left over craft or wood scraps you just can’t toss away. We used all the left over scrap we had from framing our bathroom mirror post, wood left from a cabinet build, and tile left over from our tile project in the master bathroom. You can pretty much use any thing to make a good DIY picture frame, so don’t be afraid to be creative.
Here’s what we did to create our DIY picture frame:
First, I cut the frame pieces to my desired length on 45 degree angels to start my DIY Picture Frame.
Then we glued the 45 degree angels together and added as mall brad nail using our Ryobi nail gun to form our DIY picture frame.
Once done, we trimmed down a small piece of wood for the center of the DIY picture frame and installed by using our Kreg jig to make 4 Kreg pocket holes, our Ridge power driver, and 4 pan head screws. We secured the flat board to the sides of the frame.
After we were done we painted the board the color of our choice, we used Annie Sloan Chalk paint in French Linen.
Once we painted the board we added our left over tile around the edge of the frame. The pieces left over were perfect and we slid them into place like a puzzle making sure we did not have to cut any of the tile.
On the side of the DIY picture frame, we used wood icing product and a stencil to get our raised decor on the frame. We simple spread the wood icing product on like peanut butter, and let it sit a couple minutes, then lifted the stencil to get our effect.
When the stencil dried, we painted the center ring of the DIY picture frame with our AS Chalk paint in French Linen to match our center board, following the rest of the frame in an old white color.
We added a white cloths pin clip purchased from Joann’s Crafts into the center of the board with our glue for our picture to hang in the center, and hung on the wall to share with our family and guests. We used a cloths pin because we like to change out our photos as they arrive from family.
This really was an easy project to create your own DIY picture frame. If you do not have a saw to cut the 45 degree angles, you can use a compound miter box and hand saw, or have a handy neighbor cut the angels for you. Once done, stand back and enjoy your DIY picture frame handy work!
We hope you enjoyed our post on making a DIY picture frame today. We love that you stopped by to read our post. Stay warm and safe outthere if you live in a bad weather area. If you are in the sun, absorb a little for me – Vitamin D is starting to become a food group here in Missouri and I can use all I can get! ;-)
Please stop by the blog - check out our advertisers, and leave us a message - we would love to hear from you all :-) Until tomorrow’s post!
Linda :-)
Enjoyed the project?
![Linda Crandall](https://cdn-fastly.hometalk.com/media/profile/2017/03/20/196880_1.jpg?size=91x91)
Want more details about this and other DIY projects? Check out my blog post!
Published February 5th, 2014 6:36 PM
Comments
Join the conversation
1 comment
Frequently asked questions
Have a question about this project?