Maintenance of Danish Teak furniture residential?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How can I remove these water marks from wood tables?
My husband bought these tables and a few of them are in good condition while some have like water marks on them (not sure though). I would like to know what could I ... See more
Cat scratch pulls on a couch
I have an ivory, jacqaurd fabric couch. I recently rescued two young cats and one has claws. I came home one day to find she scratched the front of the arms. They had... See more
try this website
homeguides.sfgate.com › Home › Home Improvement
Apply a good quality furniture oil to a soft cloth and then liberally rub the oil on the wood. Let the oil soak in overnight, then buff, buff, buff with clean soft cloths until you get a nice shine. Do this whenever the wood appears dry.
If you buy your furniture already oiled with teak oil it will have a darker than normal mid brown color and a soft sheen. Teak wood is of itself naturally oily and requires no treatment to be used indoors or outdoors, and the use of teak oil won't increase the life of the timber. It does change the color somewhat and it can also help a little to prevent stains from seeping into the timber grain. It will slow down the greying effect caused by ultra violet rays.
To maintain its appearance teak oiled furniture will need to be re-oiled periodically. If you decide to re-oil your furniture you can contact us for supplies of teak oil, or buy from your local supplier. A basic method for oiling is as follows:
The furniture will need to be cleaned first [see below] Afterwards ensure that it is nice and dry before starting to oil. Have a good look around the furniture first and attend to any areas requiring sanding before starting work.
You will need some teak oil, a clean 1" or 2" paint brush, some clean cotton rags, good light and plenty of space to work in. It can be a little messy so be sure to wear some overalls, and wearing household gloves to keep the oil off your hands is a good idea as well.
The oil can be applied with a clean brush, starting from the top and working downwards. The surface should be left wet by the brush, but try to avoid leaving too much surplus oil behind as you work.
After a few minutes - maybe 5 - 15 depending on the ambient temperature, the oil will start to become 'tacky'. At this point the surface of the furniture should be wiped down with a clean cotton rag, carefully removing all surplus oil.
One coat is usually sufficient, but you can apply a second coat if required, after a minimum of one hour for the first coat to dry. Once you've completed the oiling and the surface is touch dry, a second clean rag can be used to buff up the surface.
https://www.danishteakclassics.com/about/furniture-care/
Susan's description was spot on- keep us posted!!
Susan is spot on..I cleaned (used Murphys oil soap and a soft scrubber )and re oiled a teak table with this method. After the oil was buffed I used Howard Feed and Wax.