Stain question
by
Karekey
+3
My husband finished a table for my sons apartment and thoiught it needed another coat of stain but I did not realize he had put a thin coat of poly on the table top and now it won't dry! It looks amazing but it is still tacky 6 hours later! Help I hope we don't have to sand down and start over.
Related Discussions
Suggested Project Book
Wow! I would try removing the last coat of stain. an see if the poly will dry. you may have to strip the whole thing again. Good luck.
I Karekey. I tend to agree. See if you can get the last stain off. Assess the look and decide if you need to give it a light sanding. Then you may need to re-apply both the stain and poly. Good Luck.
Dampen a lint free cloth with mineral spirits and lightly wipe the stain in the grain direction. This will remove some of the surface stain and assist in the drying.
May just be able to let it go otherwise place
Beware of Dengee Fever, it can really wipe you out and there is no cure. Its a treat the symptoms thing
sorry wrong post, thought I was on mosquitos