Wheelbarrow Water Feature ~ Our Fairfield Home & Garden
by
Barb Rosen
(IC: blogger)
5 Materials
$36
1 Hour
Easy
When I was gifted a vintage wheelbarrow, I knew just what to make. A Wheelbarrow Water Feature!
I first sealed the wheelbarrow so it would keep its vintage patina but not rust. Then into the tool shed I went for an old hand pump and an assortment of terracotta pots I had collected.
Arrange the pots and fill with water. I designated the large pot to hide my water pump and hold the hand pump. Extend the outdoor extension cord from a GFI protected outdoor outlet to your project.
Thread clear tubing up through the pot and into the hand pump. Attach the pump to the other end of the tubing.
Make sure the water pump cord is hanging outside of the wheelbarrow. Plug it in to your outdoor extension cord. Now adjust the water flow, if necessary, on the pump and hide the extension cord under some mulch.An easy diy water feature that fits right into the flowerbed or onto a deck or patio! Remember to keep the water level high enough to cover the pump.Dismantle and pack away in the shed for winter if you have freezing temperatures. Reassemble in spring and add water plants for a very special container garden!Please click on my blog article link below for all the particulars! Thanks for reading! Enjoy! Barb Rosen of Our Fairfield Home and Garden
Enjoyed the project?
Suggested materials:
- Terracotta pots
- Vintage wheelbarrow
- Outdoor extension cord
- 120 GPH water pump & tubing
- Vintage hand pump
Want more details about this and other DIY projects? Check out my blog post!
Published September 23rd, 2017 5:03 PM
Comments
Join the conversation
3 of 29 comments
-
Barb Rosen on Oct 07, 2017
Thanks so much, Val! I'm glad you like it!!
-
-
Maureen May on Oct 22, 2017
Absolutely inspirational. A great idea. You have got me thinking. A wonderful job done! UK.
-
Barb Rosen on Oct 22, 2017Thanks, Maureen! Hope you have fun making one of your own!
-
-
Frequently asked questions
Have a question about this project?
Great project. Did you make the birds you have on sticks(?) or did you purchase them?
I really like your water wheelbarrow. But, I'm intrigued with your bottle tree. Any chance we can have the directions for that as well? (miahbugs@yahoo.com)
You mentioned that you used Thompson Water Seal, but on the instructions for that it says it should be used on wood base only. How long would it last on the metal wheelbarrow? And does it actually hold?
Love your idea!