Need ideas on "sprucing up" this nightstand set
Any ideas?
-
Sherry M. on Mar 06, 2014I'd glue some scroll work pieces to the night stand similar to the dresser before painting, make them look like a set. Home Depot has a lot of the fancy trim work, you just glue (the best) or tack them on. And maybe close up the "toe kick" on the night stand with wood that would take some of the "cheap" look away. Please post picks when you finish, would love to see the end results.Helpful Reply
-
-
Jenny Hughey on Mar 06, 2014Oh great idea. I had no clue Home Depot had things like that. I think I need to go browse. Will see about closing up the toe kick part too. Thanks!! My bedroom will be my first real furniture project. It'll be a while, but I'll definitely post pics when I'm done.Helpful Reply
-
-
Marianne Porter on Mar 06, 2014Stencil itHelpful Reply
-
-
Jenny Hughey on Mar 06, 2014Thanks for the idea marianne..Helpful Reply
-
-
Charlotte's Chair on Mar 06, 2014You may also try changing out the door pull to a more vintage look, they have them at Home Depot as well.Helpful Reply
-
-
Opal on Mar 06, 2014I would use the molding idea on the front, paint it first because it helps for placement. You can also buy feet at home depot if you wanted to enclose the bottom and side trim (think skinny dowel). On the top, rather than trim pieces, think frame to go on top which would already be assembled and easier to work with. Again, paint the pieces you are attaching first so any spot you might not be able to get to because of the glue will be a non issue and the painted pieces will be easier to place visually. I don't think it is necessary to match all of the elements, just a few. I would love to see whatever you decide, please post.Helpful Reply
-
-
Jenny Hughey on Mar 07, 2014Definitely changing the pull. I have seen some interesting designs at anthropoglie that I may use for all my pieces in the bedroom..or at least that same "family" of pulls.Helpful Reply
-
-
Jenny Hughey on Mar 07, 2014Feet is a good idea Opal. I like that. Maybe I can find something similar to the bottom of the dresser. I think I'd have to cut something down to use them though, because the nightstand is the perfect height now. Thanks for the advice of painting the trim pieces beforehand. I hadn't considered the glue might make it hard to paint afterwards. You think a frame to go on top of the dresser's surface? Interesting idea. I'll have to measure it..would stop items from falling off the edge too. hmm.. Such great ideas! Thanks!Helpful Reply
-
-
Gladys on Mar 07, 2014Check your closest Habitat for Humanity store or a Resale store for a cabinet door the size of this door - could probably find one for $1 - $3 if you can find the right size. Also, if you'd like to add legs, as someone suggested (a very nice idea), you could take the top off this cabinet and cut the upper sides off to allow for the height of the legs, and probably find a little larger top (perhaps another cabinet door) or a pretty wood tray to use as a top. If you could find someone to cut a fancy trim piece like the one on the bottom of the dresser, to add between the new legs, that would really dress it up. Looks like there are lots of possibilities, and we'll all be anxious to see what you end up doing. I have a couple of these "cheap" stands too, and I'm talking myself into remodeling jobs too. :-) Happy repurposing!!Helpful Reply
-
-
KathrynElizabeth Etier on Mar 07, 2014I'd go with the color paint you're using, and add a stencil in stark black. Depending on the stencil size, I would either change out the hardware for black or an antique bronze. I love pieces like this nightstand because they are blank canvasses. Another thing you can do, if stenciling is not your thing, is use black contact paper (preferable the chalkboard type) and cut out designs that will look like stencils or silhouettes.Helpful Reply
-
-
Debbie Harris on Mar 08, 2014Because of how it's built, add molding instead of feet aroung the bottom. It will help weight it down and take the toe kick out of the picture. Definately add a stenciled design or special words.Helpful Reply
-
-
Brendalee Perryman on Mar 08, 2014get 1"x3" and a jig saw..cut a piece for bottom that matches scroll on bottom of dresser..add some little pieces from home depot..then take handles off spackel holes .. re drill top corners ..replace all ...have knobs same as dresser paint all three pieces to match... if little night stands have that slick finish paint first with kilz...Helpful Reply
-
-
MM&D on Mar 08, 2014Love all these ideas above. I agree about filling in the bottom rather than feet. If you finish it with a cute basket or bin on the shelf it will look totally custom. Can't wait to see the after!Helpful Reply
-
-
Nancy on Mar 08, 2014New pull hobby lobby. Stencil or chevron. Will look great. Good luck. Might add some wood molding before you paint.Helpful Reply
-
-
Lindsay Nathanson on Mar 08, 2014Add a backing to the open upper, open part and either paint it the same colour, or use a piece of self stick wallpaper or wrapping paper in complimentary colours for visual effect. I'd avoid doing the scrollwork on the big cabinet drawer, as the dresser only has it on the smaller drawers, and it wouldn't match... If you changed the upper portion to a drawer then put the scrollwork on the new drawer to match...Helpful Reply
- See 1 previous
-
-
Liliana Wells on Mar 08, 2014Paint, stencil and trim and others have suggested. Pick a trim that compliments the dresser so the two pieces don't look so mismatched. New hardware will add character to the piece. Good luck. Post pictures when you are done.Helpful Reply
-
-
Patty Morgan on Mar 08, 2014I would give it a new home and look for a different one at a yard sale. I like to put small tables in my closet to put my cloth on it. The small drawers are good socks. I basket would be great to place things in where there is an opening. It is just so different from your other piece you have in the room. I also think it would be better to have a table that is a little larger and with out the opening to hide the wires.Helpful Reply
-
-
Diana on Mar 08, 2014I would distress all the pieces and use a glaze, then add interesting hardware. The dresser is going to look great, but I'd paint the trim on it a different color that way it will stand out.Helpful Reply
-
-
Sonja on Mar 08, 2014Your dresser is beautiful...I also would give your nite stand a new home and look for a good yard sale for something a little closer to the shape and style of your dresser...Helpful Reply
-
-
Jenny Hughey on Mar 08, 2014I think the molding will help it tie in to the other pieces too..will look and see what I come up with! Thanks!Helpful Reply
-
-
Tina Rudnik on Mar 08, 2014If you are a reader in bed use printed titles of your favorite bedtime books on it. Many ways you can apply it. It just makes it say that it's your nightstand and what you love to do along with a hot cup of tea and warm blanket .Helpful Reply
-
-
Jenny Hughey on Mar 08, 2014Cute idea!Helpful Reply
-
-
Caroline Cjmg on Mar 08, 2014well, I'd change the handles to match and I'd try to put on the same features (you could go to a shop where they make it for you, or you could make a mold yourself, in plaster or cut it out of balsa wood, it's so soft and easy to work with)Helpful Reply
-
-
Linda Sutter on Mar 08, 2014Hardware can make a big difference. Find wood Hardware and paint it creatively.Helpful Reply
-
-
D-p306094 on Mar 08, 2014why dont you saw the top off, make a nice padded cushion put some velcro on the back of the cushion &the top to which you have sorn off ,and have it as a nice footstool. and the cupboard, use as,its purpose,or turn it on its side, hang it on the wall with the door handle at the top to pull down, it would be good in a craft room, or with a mirror on top & store hair products in, or also with the mirror,to be used as a phone desk to store phone books or to use as a medicine cabinet with a mirror on top, then with all this in mind decorate have fun!!!!!!!!!!!!!Helpful Reply
-
-
Beth Hall on Mar 09, 2014Take the door off the nightstand and find a basket to fit the spaceHelpful Reply
-
-
Jenny Hughey on Mar 09, 2014To fill the upper space? Yeah, I hope something like that fits..doing measurements today! Thanks!Helpful Reply
-
-
Dawn Fryer on Mar 09, 2014Take a narrow picture frame and attach to the door for depth. Also I agree about changing the hardware. Try to find or make a oval top for it that is a bit larger also giving depth. Good luck!!!Helpful Reply
-
-
Sherry B. on Sep 17, 2014Add lots of trim molding to hide cheapness and across bottom and under top curved molding and add curvy legs. Then put bright wicker baskets in opening. Either decoupage top and add glass in middle of trim or put pretty tray on top.Helpful Reply
-
-
1da1067700 on Feb 02, 2015Chalk paint n stencilsHelpful Reply
-
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
I have a nightstand that needs to be raised 4" to 6 " up. HELP!!?
How can i raise this higher without making it look ugly.
Need update ideas for Bedford stone fireplace
Just bought this house. It's got great bones but needs updates everywhere. That means the budget is tight. I need ideas to update this fireplace. It is boring and... See more